Operation Manual

Multi-Handset Features
Multi-Handset Features [72] www.uniden.com
Intercom
You can use the intercom to talk to another handset or base
without using the phone line. While the phone is in standby
mode, press back/hold/int'com. Select the handset or base you
want to page. If you select
All , all other handsets and the base
will be paged.
If the handset or base you are trying to page is busy, the phone
displays
System busy Please try later . If the handset you are
trying to page is out of range, the phone displays
No Signal
Press HELP
and the page is canceled.
Answering an intercom page
When the handset receives an intercom page, it sounds a tone and shows the ID of
the handset that is paging. To answer the page, pick up the handset and press talk/
flash, speaker, or back/hold/int'com on the handset, /flash or back/hold/
int'com on the base.
• If you receive an outside/intercom call or page while selecting the other handset, the
operation is canceled.
• If the party does not answer within one minute, the operation is canceled.
• During an intercom call, if you receive a call, you will hear a ringer tone from the ear
speaker.
• If all handsets are paged, only the first party to answer the page will connect.
• If you do not select a handset within 30 seconds, the operation will be canceled.
To hang up an intercom page, press end on any handset or end/find handset on the
base.
+PVGTEQO
5'.'%65'.'%6
#NN
*CPFUGV
*CPFUGV
*CPFUGV
$CUG
