Operation Manual

Multi-Handset Features
[71] Multi-Handset Features www.uniden.com
Room/Baby Monitor
This feature allows you to monitor
sounds in another room. Place a
handset or the base in the room you
wish to monitor; it will function as a
microphone. A second handset or the
base can be used as a remote speaker,
allowing you to monitor sounds in the
room.
Using Room/Baby Monitor
To enter Room Monitor mode, press
the center of the joystick or menu/
select. Select the Room Monitor
option and then select the handset or
base you want to monitor. Press end
from the handset or end/find
handset from the base when you want to stop monitoring.
To prevent the monitoring of a particular handset or the base,
simply turn off the Room Monitor feature on that handset or on
the base.
To turn off the Room Monitor, go to System Setup, select Base
from the base menu or select Handset from the handset menu;
then
Room Monitor and select off . You will hear a confirmation
tone.
5'.'%6
  4QQO/QPKVQT
•This feature only works
when the handset is
within the range of the
base.
•If the party is out of
range,
Unavailable
appears in the display,
and the operation will
be canceled.
note