Operation Manual

System Setup Menu
[31] System Setup Menu www.uniden.com
Storing Ringer Tones
1) Connect the audio recording cable to the handset and sound source (e.g.stereo
or CD player). Insert one end of the audio recording cable into the handset's
headset jack and the other end into the sound source. You can also simply use
the handset's microphone by holding the handset close to the sound source.
2) Go to
Rec/Edit Rings .
3) Select a location from 1-5, and press the OPTIONS soft key.
4) Select
Record . To start recording, press the RECORD soft key.
The message counter displays
20 and then begins to count
down.
5) When you are finished recording, press the STOP soft key. The
phone will play the recorded ringer. To re-record the ringer, press
the ReRec soft key while playing the ringer.
6) Enter the title of this ringer (up to 12 digits) using the number
keypad, or the DELETE soft key, right, or left key.
7) Press the center of the joystick. You will hear a confirmation tone, and
Done!
appears.
Playing the Ringer
1) Go to
Rec/Edit Rings .
2) Select a ringer to play, and press the OPTIONS soft key.
3) Use the joystick to select
Play . To stop, press the center of the
joystick or the STOP soft key.
4GEQTF4KPIGT
9CKVKPIVQ
4GEQTF
4'%14&

1RVKQPU
2NC[
%JCPIG6KVNG
&GNGVG

5'.'%6