Owner`s manual
31
2. Aconfirmationscreendisplays.UseCH►orCH◄toselectYes.PressMENU/
OK.
3. The system returns to the same screen where you can see that the folder or
record has been deleted.
The BW31xx Series lets you view live video from your system on your television.
You can also use Skype™ to view your system on a remote PC or wireless devices
such as an iPhone®, iPad®, or AndroidTM smartphone or tablet.
VIEWING LIVE VIDEO
1. Connect the monitor to your television using the AV Output cable (included).
2. The monitor screen goes blank and the TV screen displays the camera output.
# The monitor controls still operate while the system is connected to the TV. You
can change cameras, set the cameras to scan through each in sequence, etc.
Viewing On Your TV
1. Set up a Skype™ account linked to your BW31xx Series. Please refer to
www.skype.com for details on setting up this free account.
# Be sure that this Skype™ account is set to “Auto Answer.”
2. Set up another Skype™ account on your wireless device or remote computer.
3. Next, invite the Skype™ account (the one linked to the BW31xx Series) into your
contacts.
4. Log into the Skype™ account (linked to the BW31xx Series) and accept the
invitation.
Viewing on Your Remote PC or Wireless Device
Setup
1. Determine which camera you want to be available for remote viewing. Set it as
the Live view camera (see page 16).
2. Connect the BW31xx Series to your home computer using the USB cable. If the
USB driver is not installed, you will be prompted to install it from the CD provided.
Follow the installation prompts and then continue with these procedures.
# For MAC Systems: You must connect the monitor to your home computer
BEFORE activating Skype™; otherwise, Skype™ cannot find the monitor.
3. Activate Skype™ on your home computer.
4. From your wireless device or remote computer, call the Skype™ account for the
BW31xx Series. As that account was set up to Auto Answer, you should see live
video from the camera you set up in Step 1.
Remote Viewing
# For remote viewing, first install the USB Driver from the CD provided.
# You must have a separate Skype™ account to call the home computer. You
cannot use your home computer’s Skype™ account to call itself.