Owner`s manual

SOLVING PROBLEMS

If... Try...

There is no picture from

the camera

• checking all connections to the camera. Make

sure the adaptor is plugged in.

• making sure that the cameras and monitor are

both ON.

• making sure that the camera is in range of the

monitor.

The picture is dropping • moving the camera closer to the monitor.

• repositioning the camera, monitor or both to

improve the reception.

• adjusting the monitor and camera antennas to

vertical position.

There are audio problems • making sure that there is sound within range of the

camera microphone.

• moving the camera or monitor farther apart if the

unit emits a loud screeching noise (feedback).

The picture has become

choppy

The picture may become choppy when experiencing

a lower frame rate. Try:

• moving the camera closer to the monitor.

• removing obstructions between the monitor and

camera.

• adjusting the monitor and camera antennas to

vertical position.

The monitor picture has

frozen

Use a blunt object like an unbent paper clip to press

RESET and reset the monitor. The monitor turns off.

Press POWER to turn it back on again.

There is an irregular

beeping coming from the

monitor

That is the Alert tone. Go to the Alert screen to turn

the alert volume down or off (see page 20).