BW30xx Series 2.3” LCD Portable Wireless Baby Monitoring System For more exciting new products please visit our website: Australia: www.uniden.com.au New Zealand: www.uniden.co.
IMPORTANT SAFETY INSTRUCTIONS This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: • This equipment is NOT waterproof. DO NOT expose it to rain or moisture • DO NOT immerse any part of the product in water.
Warning to Parents and Other Users Failure to follow these warnings and the assembly instructions could result in serious injury or death. This product is not designed or intended for use as a medical monitor, nor should this product be used as a substitution for medical or parental supervision. Always be sure that both the transmitter and receiver are working properly, and are within range of each other. STRANGULATION HAZARD. Keep the adaptor cords out of the reach of children.
Contents WHAT’S IN THE BOX? ......................................................................................... 5 INSTALLATION ................................................................................................... 6 Monitor ......................................................................................................................................................... 6 Camera .........................................................................................................
WHAT’S IN THE BOX? Digital Wireless Monitor* Digital Wireless Camera* AC Power Adaptor* Screws and Anchors Suction Cup Adaptor Bar Owner’s Manual * Refer to the table below. Model Name 2.3” Monitor BW3001 1 Indoor Camera 1 BW3002 1 2 Adaptors 1 x Camera Power Adaptors 1 x Monitor Power Adaptors 2 x Camera Power Adaptors 1 x Monitor Power Adaptors • If any item is missing or damaged, contact your place of purchase immediately.
INSTALLATION MONITOR 1. Place the monitor in a location with clear reception from your camera(s). Place it a minimum of 1m from the crib. 2. Plug the AC adaptor power plug into the monitor’s DC adaptor input jack. 3. Plug the power plug into a 240 volt AC (standard indoor) power outlet or surge protector. 4. Press and hold POWER to turn the unit on or off. Let the monitor charge for 6 hours prior to first time use so the built-in rechargeable monitor battery is fully charged.
Wall Mount The Indoor Camera mounting clip has two slots that fit over screws to mount the unit on the wall. WALL 1. Mark the position of the screw holes on the wall. 2. Drill holes and insert the anchors and screws provided. 3. Be sure to leave room for the mounting to fit over the screw heads. 4. Place the mounting over the installed screws and push it downwards, locking it into place. 5. Adjust the camera as needed. Suction Mount 1. Insert the suction base into the mounting clip as shown. 2.
BASIC OPERATION WIRELESS CAMERA Left side Front Right side NOTE: The RESET button is on the back. 1 10 2 3 17 6 7 11 8 9 12 15 13 16 14 18 19 20 4 5 No Keys/Indicators 1 Camera Antenna 2 Temperature sensor 3 Pair Function Sends and receives signals to and from the monitor Detects temperature at camera side and displays it on the monitor LCD Pairs the camera to the monitor. 4 Mounting Clip 5 Suction Base 6 ▲Vol This fastener can attach the camera to shelves or ledges.
12 Light Sensor 13 Camera Lens 14 Microphone 15 Speaker Receives sounds for the area near the camera, and transmits sound from the camera to the monitor. Produces the sound transmitted from the monitor. 16 POWER Turns the camera ON or OFF. 17 NIGHT LIGHT Press to turn the night light ON or OFF. 18 Charging LED 19 Power LED 20 DC 5V Power Red = Charging Green = Fully charged Off = Camera and power adaptor are disconnected or power adaptor is disconnected from power source.
WIRELESS MONITOR 1 2 3 15 4 11 5 16 12 6 7 13 8 14 17 18 9 10 No Keys/Indicators 1 Monitor Antenna 2 LED light bar 3 POWER 4 2.3 inch LCD screen 5 ▲Vol 6 ZOOM 7 LULLABY PLAY/ STOP CH◄ 8 10 NOTE: The RESET button is on the back behind the kickstand. Function Sends and receives signals to and from the monitor. The left LED indicates power and remaining LEDs indicate sound. Turns the camera on and off. • Increase speaker volume. • In Menus: Scroll up. • In Lullaby: increase volume.
9 Microphone 10 ▼Vol 11 MENU/OK • Decrease speaker volume. • In Menus: Scroll down. • In Lullaby: decrease volume. • In Zoom: Scroll down. Select a menu option or accept a setting. 12 TALK Activate Intercom function (see page 25). 13 BACK In Menus: Back one level. 14 CH► 15 NIGHT LIGHT: 16 LULLABY SKIP: 17 Charge LED 18 DC 5V Power: • In Menus: Scroll right. • In Zoom: Scroll right. • In Live view: Switch between available cameras. Remotely turn the camera night light ON or OFF.
LCD Display 1 2 3 4 5 6 CAM1 21°C 7 8 1 x2 2013.02.02 12:26:00 10 9 No Icon 1 What it indicates Signal Indicator (displays in full screen mode only). The number of bars in the signal indicator shows the strength of the signal received from the camera. One or no bars indicates the signal is poor, and 4 bars indicate a very strong signal.
2 3 CAM1 21°C 4 5 6 Camera Indicator. indicates which camera is displaying. Press CH► or CH◄ on the monitor to switch between available cameras. It will cycle in the following order: CH► : CAM1—CAM2—CAM3—CAM4—QUAD— AUTO SCAN — CAM1 CH◄ : CAM1—Auto SCAN—QUAD—CAM4— CAM3—CAM2—CAM1 Temperature indicator (displays in full screen mode only). Displays the temperature on the camera side. Night light indicator (displays in full screen mode only). Displays when the night light is turned on.
USING THE BW30xx Series Viewing Modes Live view displays live images from the cameras in the following modes: • Quad mode: Monitor displays video from all cameras on a single screen in 4 quadrants. Any channel that does not have a camera remains blank. • Single mode: Monitor displays video from one camera at a time. • Scan mode: Monitor displays video from one camera at a time, but cycles through all cameras one by one. Use CH► or CH◄ to cycle through these modes.
SYSTEM MENU DESCRIPTIONS Press MENU/OK to access system menus. Use the navigating buttons to navigate up (▲Vol), down (▼Vol ), left (CH◄), and right (CH►) in the menus, then press MENU /OK to confirm a setting. Use CH► or CH◄ to focus on the 5 different system menu selections on the clothesline.
SYSTEM Move the focus to the System option and press MENU/OK to access the six System options: • Date/Time • Brightness • Factory Reset • Language • Temp. display unit • Temp. alert range Date & Time This option allows you to set the system date and time. The display format is Year.Month.Day. Hour:Minute 1. From the System menu, select Date/Time and press MENU/OK. The Date/Time screen displays. 11 30 10 30 2. Press ▲Vol or ▼Vol to increase/decrease the number for that setting. 3.
Brightness This option allows you to adjust the brightness level for each camera. (Default = 3) 1. From the System menu, select Brightness and press MENU/OK. The Brightness screen displays. 2. Press CH► or CH◄ to increase or decrease the brightness level (6 levels). 3. Press MENU/OK to save the setting and return to the main System options. The new brightness level displays in the Live view. Factory Reset This option allows you to restore your system to factory settings. (Default = No) 1.
Language This option allows you to select the system’s display language from English, Español, or Français. (Default = English) 1. From the System menu, select Language and press MENU/OK. The Language screen displays. 2. Press ▲Vol or ▼Vol to select a language. 3. Press MENU/OK to save the setting and return to the main System options. Temperature Display Unit This option allows you to set the temperature to display in Celsius (C) or Farenheit (F). (Default = C) 1. From the System menu, select Temp.
Temperature Alert Range BW30xx Series measures the ambient room temperature where the camera is. If the temperature falls outside of a preset range, the system alerts you (the temperature indicated on the display screen turns red and starts to flash). Temp. alert range lets you set that range. [Default = Low Temperature: 16°C ; High Temperature; 25°C; Off] 1. From the System menu, select Temp. alert range and press MENU/OK. The Temp. alert range screen displays. 2.
ALERT Temperatures out of range or a camera out of range triggers alerts. This option allows you to set the alert volume. There are 6 levels available. [Default = Zero (Mute)] 1. From the main menu selections, select Alert and press MENU/OK. The Alert screen displays. 2. Press CH► or CH◄ to adjust the volume. 3. Press MENU/OK to save the selection and return to the main menu selections.
VOX This option allows you to set the sound sensitivity for the camera. (Default = High) 1. From the main menu selections, select VOX and press MENU/OK. The VOX sensitivity screen displays. 2. Press ▲Vol or ▼Vol to select a level (High, Low, or Off). 3. Press MENU/OK to save the selection and return to the main menu selections. POWER SAVE Activating the Power Save feature turns off the LCD after two minutes of inactivity. This option allows you to enable or disable this function.
2. Press ▲Vol or ▼Vol to toggle between turning the Power Save feature on or off. 3. Press MENU/OK to accept that setting and return to the main menu selections. CAMERA This option allows you to pair the monitor with cameras (up to 4 cameras supported) or to turn on/off an individual camera. The cameras are still powered on but no longer visible to the monitor. 1. From the main menu selections, select Camera and press MENU/OK. 2. The Camera screen displays. Two options display: Pair and On/Off.
Pair Pairing allows you to introduce additional cameras to the monitor. The monitor can then recognize and display video from them. The camera that comes with this system is already paired. ##Before pairing additional cameras, be sure they are powered and turned on. See page 6. 1. Select Pair from the Camera screen. The camera selection screen displays. PAIR 2. Press ▲Vol or ▼Vol to select the camera you want to pair, then press MENU/ OK.
SPECIAL FEATURES ZOOM ZOOM displays the camera image in double size. Press ▲Vol, ▼Vol, CH►, or CH◄ to see the parts of the image not displayed on the LCD screen. Press ZOOM again to return to normal view. NIGHT LIGHT You can control the BW30xx Series night light using the NIGHT LIGHT button on the right side of either the monitor or the camera. However, if you want to control it from the monitor, you must place that camera in full screen mode. 1.
5. Press LULLABY SKIP to skip to Lullaby #4. The system plays Lullaby #4 then repeats it. 6. Press LULLABY SKIP to skip to Lullaby #1. The system plays Lullaby #1 then cycles through all lullabies. Press ▲Vol and ▼Vol on the monitor or camera to adjust the volume. Press ▼Vol all the way down on the monitor to mute the lullaby playing through the monitor. USING THE INTERCOM The Intercom feature lets you talk to whomever is within camera range. 1.
SOLVING PROBLEMS If... There is no picture from the camera The picture is dropping There are audio problems The picture has become choppy The monitor picture has frozen There is an irregular beeping coming from the monitor 26 Try... • checking all connections to the camera. Make sure the adaptor is plugged in. • making sure that the cameras and monitor are both ON. • making sure that the camera is in range of the monitor. • moving the camera closer to the monitor.
SPECIFICATION GENERAL Operating Frequency Range TX Power RX Sensitivity Camera Monitor 2.400 ~ 2.4835GHz 15dBm NA NA –81dBm Type of Spread Spectrum Used Type of Modulation Used FHSS GFSK Communication Range 150ms Line of Sight CAMERA Image Sensor Type Manufacturer/ Model # 1/6.5” Color CMOS Image sensor Effective Pixel Image Processing • 640 x 480 • MJPEG Lens • 3.0mm / F2.8 Exposure • Auto White Balance Auto Power Requirement 5.
MONITOR Display Size/Type Resolution 2.3” TFT LCD 320 x 240 Power Requirement 5.0VDC +/–5% Power Consumption Operating Temperature Range • 260mA Max (Normal) • 740mA Max (Charging) –10°C ~ 40°C (14°F ~ 104°F) Operating Humidity Range Within 85% Relative Humidity RoHS Compliance Yes Battery Life 4.
ONE-YEAR LIMITED WARRANTY BW30xx Series IMPORTANT Satisfactory evidence of the original purchase is required for warranty service.Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below. Warrantor The warrantor is either Uniden Australia Pty Limited ABN 58 001 865 498 (“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the case may be.
Statement of Remedy If the Product is found not to conform to this warranty as stated above, the Warrantor, at its discretion, will either repair the defect or replace the Product without any charge for parts or service. This warranty does not include any reimbursement or payment of any consequential damages claimed to arise from a Product’s failure to comply with the warranty. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
©2013 Uniden Australia Pty Ltd/Uniden New Zealand Limited Printed in PRC 32
