BT112 Bluetooth® Headset User’s Guide Also included in this package: AC (indoor) power adapter Extra ear cushions DC car adapter Ear hook Questions? Problems? Get help on the web at www.uniden.com or call our Customer Service line at 800-292-2294.
Getting to Know the Headset CAUTION! Using the headset at high volume can cause permanent hearing loss. To reduce the risk of hearing damage, use the minimum volume level necessary (see Avoid Hearing Damage section). Power port Earhook ring Multifunction button LED Volume button Ear cushion Microphone What the buttons do Release the button to activate the function.
To do this... Do this... Power on headset Press and hold for 3 seconds. Press and hold for 5 seconds. Multiunction Pair with cellphone Button (MFB) Power off headset Press and hold for 4 seconds Refer to later sections in this manual for specific operational functions. Increase volume on a call Press and release VOLUME side button. Press and release VOLUME side button until the Volume Decrease volume on volume level cycles through increasing the volume a call and returns to the lowest volume level.
If the LED... It means... Blinks once every 6 seconds The device is in connected mode. Blinks 3 times every 5 seconds The device is in an active call. Is on The device is in pairing mode. The device is charging. Is off Charging is complete. Setting Up Your Headset Charge the battery Before using your headset, charge the battery for at least 8 hours. Charging the battery completely (and keeping it charged) will help you get the longest possible talk and standby time out of the battery.
1. Connect the adapter to the power connector on the top of the headset, then plug it into a standard 120 volt AC (regular indoor) power outlet. The blue LED remains on while the headset is charging. 2. Charging is complete when the blue LED turns off. The headset beeps every 30 seconds when the battery is low. The headset may power off if it is not charged within 30 minutes.
3. On your phone, start a search for Bluetooth headsets or handsfree devices. (This process may take several seconds, and it will be different for each phone; see your phone’s manual for detailed instructions.) 4. Your phone should discover a device called BT112 or Headset. If your phone asks if you want to pair with this device, answer yes. 5. When your phone prompts you for a PIN code or password to pair with the BT112, enter 0000. 6.
• Whenever you turn the headset on, it will automatically try to connect to whatever device it was connected to last. • If the headset loses the connection (e.g., if your phone is out of range), it reconnects automatically when the phone is back in range. To manually reconnect, press MFB. • If the headset goes more than 1 hour with no connection, it automatically turns off. Using Your Headset Put your headset on Insert the ear cushion, then wrap the earhook behind your ear.
If you can’t find your sweet spot or if the cushion doesn’t fit comfortably in your ear, change it to one of the other sizes that came with the headset. Pull the cushion off gently and snap a new one on. Wearing the headset on your left ear If you want to wear the headset on your left ear, slide the earhook off and turn it over. Hold the hook at the bottom and gently slide it off the headset. Flip the hook over so it faces the other direction. Slide it back on headset and back into place.
To do this... Turn headset on/off Make a call Answer a call Hang up Transfer call from headset to phone/ from phone to headset Reject an incoming call Redial the last number Do this... Press and hold the MFB button for 3 seconds (turn on) or 4 seconds (turn off ); release the button. Just make the call from your mobile phone as usual; your phone should automatically send the call to the headset. If your phone doesn’t, press and hold MFB for 2 seconds to manually send the call to the headset.
To do this... Do this... Adjust the volume Press the Volume button. There are 6 volume levels that cycle as the Volume button. When the highest level is reached, the volume level cycles back down to the lowest. Activate voice dialing With the phone in standby, press and hold MFB for 2 seconds then release. When you hear a beep, start using your phone’s voice commands. (Your phone must support voice dialing, and all commands must be preprogrammed.
If... The headset won’t turn on. The headset won’t pair with my phone. The headset paired with my phone, but I can’t hear anything through it. The headset keeps beeping, and I don’t know why. Try... - Charging the battery completely. - Making sure your phone is in pairing mode. Check your phone’s manual for instructions on Bluetooth device pairing. - Turning the headset off. Wait at least 10 seconds, then try again. (See page 5 for pairing instructions.
If... Try... I can hear the caller, but the audio is very weak or soft. - Turning the speaker volume up. - Moving closer to your phone (if you aren’t carrying it). - Adjusting the ear cushion to find your “sweet spot” (see Using Your Headset section). Reset the Headset Make sure the headset is not connected to any mobil phones. Push and hold the MFB for 4 seconds. The headset resets and all mobil phone links are deactivated. General Information • You cannot use the headset while it is recharging.
• The headset can be connected only to devices that support the Bluetooth headset or hands-free profile. This product is not compatible with standard cordless phones. Battery life With average use, the battery should provide about 5 hours of talk time and 100 hours (4 days) days of standby time. A battery that is new or left unused for long periods of time can have reduced capacity the first few times it is used. For maximum battery life, keep your battery charged.
• Equipment that uses microwaves, especially microwave ovens • Wireless LAN equipment or WiFi connections • Other Bluetooth devices or computers • Certain cordless telephones • Certain medical equipment and appliances If you have problems with static during calls, look for one of these interference sources. Try moving away from the suspected source. If the noise continues, there may be interference on your phone itself, and any noise in the phone’s connection will come through on the headset, too.
Cleaning the headset • If necessary, remove the ear cushion and earhook. Dampen a lint-free cloth with water or a cleaner specifically designed for electronics, and gently wipe the headset clean. • Do not expose this product to liquid (water, alcohol, etc.) or submerse in liquid for any reason. Avoiding hearing damage Using any headset or earbud at too high a volume can cause permanent hearing damage.
• If someone next to you can hear the other end of the call through your headset or if your ears hurt or ring when you hang up, the volume is too high. • The longer your ears are exposed to noise, the greater the risk of damage. Limit calls at higher volumes (or other exposure to loud noise). • For more information on protecting your hearing, visit the WISE EARS® website (www.nidcd.nih.gov/health/wise/) or consult an audiologist.
• Use only the power cord and batteries indicated in this manual. Do not expose the battery (or the device) to flames or dispose of it in a fire: the battery may explode. Check with local authorities for possible battery disposal instructions. • Do not disassemble, modify, or attempt to repair any component of this product. • Check the laws and regulations on the use of mobile phones and handsfree equipment in the areas where you drive.
FCC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this product.
To maintain compliance with IC RF exposure compliance requirements, please follow operation instruction as documented in this manual. Lithium-polymer battery information This device contains a lithium-polymer battery. The headset and battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal. Two-Year Limited Warranty Important: Evidence of original purchase is required for warranty service.
not manufactured by Uniden, or f) installed or programmed by anyone other than as detailed by the owner’s manual for this product.
the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Service 4700 Amon Carter Blvd.
