User manual

8.3 ARC330Pro connecting the scanner to your soundcard
ARC330PRO has a built in digital audio recorder. To use this option you must
connect the speaker/headphone output ( 1/8” mono connector ) to your
soundcard line in (usually a light green connector).
Also you must setup the recording volume in Windows:
- start ARC330PRO and start the virtual control
- Click on the Recording tab and press the ‘Set Recording Volume’ button:
In this window make sure that the Line-In is selected. Now you can set the
recording volume by moving the Volume slider.
ARC330 Software User Manual 102- 78