User manual

Enter registration:
Start the software by selecting START _ PROGRAMS _ Butel _ ARC330 _
ARC330 for Uniden BR330T. After the start screen, select HELP _ REGISTER in
the menu.
Enter the name and key information: the name is case sensitive!
No spaces are allowed. The key only contains numbers. The name may contain
‘0’ (=zero) or capital O.
1.3 Connect your scanner:
The scanner must be connected to a free serial port. This is normally a 9-pin
connector at the back of your PC. Refer to your PC and scanner manual for
information.
BR330T: the BR330T comes with a serial cable; connect to a free serial port
ARC330 Software User Manual 102- 5