User manual

2.16 Instant Firmware Updates Notification
ARC330 can automatically check for Firmware updates.
To enable this option start ARC330 and click on a group in the systembrowser.
In the menu select SETUP _ SOFTWARE OPTIONS and click the GENERAL TAB.
Select the option’ Check for Firmware Update’ and now close and restart
ARC330.
If you run a firewall you must allow ARC330 to access the internet.
If newer firmware versions are available you will see a flashing warning:
Double click the red text and the software will open the firmware download
website at www.uniden.com
ARC330 Software User Manual 102- 46