User manual

2.13: Uploading data into the scanner:
From the main menu select: BR330T _ Send Data
Tip: you can also use the toolbar button or press F6.
Empty channels are NOT sent to your BR330T.
A new window is shown:
You can upload ‘All Systems’ or ‘Selected’ systems. Make your selection in the
system overview. Select All and Unselect All options are available.
Upload options:
‘Clear All Systems first’ : this option will erase all systems that are stored in
your BR330T. It will NOT reset your scanner so ‘other’ data is not lost.
‘Overwrite Systems with same name’: select this option if you want to ‘replace’
systems. The software first reads the systems that are stored in your scanner.
If systems in the scanner have the same name the software will first erase
those systems and then upload the new data.
Sending data can take up to 10 minutes. This is not a software limitation but a
limitation of the scanners ‘dynamic memory management’.
ARC330 Software User Manual 102- 43