User manual

2.6 EasyFill
EasyFill is a simple but powerful option that lets you program data in a range
of channels with only a few mouse clicks.
Additionally you can use EasyFill for quickly program a range of frequencies in
a memory bank so you can use a memory as a search bank.
Select EasyFill from the Options menu or use the EasyFill toolbar button to
display the EasyFill window:
In the top frame the channel range is selected. DEFAULT will set the start and
end channel of the selected bank. ALL CHANNELS will set all 1000 channels.
In the ‘Fill Range With’ frame you select the data you want to program in that
range. If you want to set the mode for all selected channels to NFM select the
MODE check box then select NFM and select APPLY, this will program WFM in
all selected channels. You can select more than one check box.
If the Frequency check box is selected you can set a start frequency and a
step. The software will automatically calculate the frequencies for the selected
channel range.
Example: Frequency is set to 88.000 MHz, step is set to 50 kHz and channel
range is 1-100. If you select APPLY the software will program 88.000 in
channel 1, 88.050 in channel 2, 88.100 in channel 3 etc.
ARC330 Software User Manual 102- 26