User manual

2.3.2 Trunk system Parameters
For every trunk system, several parameters can be set:
Refer to BR330T user manual for more information.
General:
Motorola VHF/UHF: you must program a base, offset and step frequency (see
next page).
Motorola Type 1: for a Motorola type 1 a fleetmap must be selected or a
custom fleetmap must be build.
For a TYPE 1 system it is very important that the trunk system is setup
correctly before any trunk id’s are uploaded to your scanner. Depending on the
fleetmap settings the scanner may not accept some trunk id’s.
Some Type 1 size codes require more then one block. If you enter size code 12
in block 0 the software will automatically set block 1 to size 12.
You can only program size 12 id’s in block 0,2,4 and 6.
Size Code Required blocks Blocks
12 2 0,2,4,6
13 4 0,4
14 8 0
ARC330 Software User Manual 102- 15