User manual

2.3.1 System Parameters
Click the ‘New System’ line in the systembrowser to open the system
parameter editor:
First enter a unique name in the ‘System Name’ box.
Select the System Type, depending on the systemtype, extra tabs are shown
to setup trunk system parameters.
Website: enter a website with information about this system. Pressing ‘Check
Site’ will open the website. This website link is stored in your system file.
System options: set the system options, refer to BR330T user manual for
information.
If the new system is a trunk system, additional parameters must be set, click
the ‘trunk system parameters’ and ‘trunk frequencies’ tab to setup this data.
IMPORTANT: before you start programming trunk id’s you must first setup the
correct system type to avoid problems during data upload.
ARC330 Software User Manual 102- 13