User manual

The top section has a standard Windows MENU bar and a Toolbar. Most options
found in the menu also have a ‘shortcut’ in the toolbar. If the mouse is moved
over a toolbar button a help text is shown giving a brief description of that
button.
The editor bar changes as you move the mouse in the editor grid, if you click
on a column the editor bar will show the right edit options. You can edit data
both in the editor bar or directly in the editor grid.
Tip: In the Frequency/trunk ID and Name column you can enter edit mode by
pressing F2 or double clicking a cell.
2.1 Reading data from the scanner:
After setting up the communication you can start to use the memory editor.
Because there is probably already some data in your scanner it is a good start
to first read the data from your scanner.
From the main menu select: BR330T _ Read Data.
Tip: you can also use the toolbar button or press F5.
A new window is shown:
The software always starts with reading system information from the scanner.
This information is required to read data from the scanner.
If the software fails to read data, correct the problem and press ‘Connect To
BR330T’.
ARC330 Software User Manual 102- 10