Operating instructions

Troubleshooting
If your BCT-12 is not performing properly, try the steps listed
below.
PROBLEM POSSIBLE SOLUTION
Scanner is not working properly.
Check power cord and in-line
fuse.
Check the Volume and
Squelch settings.
Signal is weak or distorted.
Check antenna and antenna
connection, or change
antenna.*
Improper reception.
Check antenna and antenna
connection, or change
antenna.*
Reposition scanner.
Scan won’t stop. Check Squelch adjustment.
Check antenna and antenna
connection, or change
antenna.*
Incomplete reception. Fringe area of reception.
Check Squelch adjustment.
Weather Search (WX) won’t work. Check Squelch adjustment.
No active station within range.
* Also see “Helpful Tips” on page 5.
If you still cannot get satisfactory results and you wish to receive
product information or return the unit for service, please call or
write the Uniden Parts and Service Division at:
Uniden America Corporation
4700 Amon Carter Blvd.
Fort Worth, TX 76155
[phone] Monday through Friday,
8:00 a.m. to 5:00 p.m. Central
32
G:...Bct12 pdf.vp
Wed Dec 03 11:28:59 1997
Color profile: Disabled
Composite Default screen