Operating instructions

Deleting Frequencies

Some frequencies that have been pre-programmed into your

BCT-12 may not be of immediate interest to you, may be

experiencing interference, or are being used as data channels.

You can lock out those frequencies from scanning.

When the scanner stops on the undesired frequency, press

one time. To lock out additional frequencies, repeat this step.

Note: You can delete a maximum of 50 frequencies. Although

it is possible to delete the highway patrol alarm

frequencies, this should never be done unless

absolutely necessary for proper operation of your

BCT-12. This causes the highway patrol alarm feature

to be inactive on that frequency. No further alarms will

be received until the deleted frequencies are restored or

a new state is selected. A frequency deleted in one

state will not be deleted in any other states. The deleted

frequencies are maintained in memory even when your

BCT-12 is turned off.

Caution: When you lock out more than 50 frequencies, the first

locked out frequency is deleted. You cannot lock out all

of the alarm, local police, and highway patrol

frequencies. If you lock out all of the frequencies by

accident, the BCT-12 will sound two short beeps.

Operating Instructions

G:...Bct12 pdf.vp

Wed Dec 03 11:28:57 1997

Color profile: Disabled

Composite Default screen