Specifications

Example 2: Programming from SEARCH mode.
Example 3: Programming "000.0000" (Erase programmed frequency
in a channel).
You can erase a programmed frequency in a channel by programming
"000.0000" into its channel. You can find and display "000.0000" on the
screen in one of two ways:
Find an open channel in the private bank. Press [PRIVATE] then
[HOLD], and use [UP] and [DOWN] to scroll through the bank to find
an open channel, "000.0000"
- OR -
Find "000.0000" from the Search & Program Mode. Every search
band has one "000.0000" display included between the band limits. It
can be displayed only in the Program Mode (after pressing [PROG]
and "CH" is blinking in the display).
146.5600
HOLD
146.5600
HOLD
CH
146.5600
HOLD
1
000.0000
HOLD
1
146.5600
HOLD SCAN
SRCH
POLICE
POLICE
POLICE
When you find an interesting active police frequency while searching 144 - 148 band,
and want to program it into POLICE bank...
POLICE
Press:
Press:
HOLD
PROG
HOLD icon appears in the display.
Press:
CH appears & blinking to indicate that
you are in the programming mode.
2 screens flip-flops to indicate that
channel 1 is available to be programmed.
POLICE icon appears in the display.
PROG
Press:
to end programming.
1.
2.
3.
4.
BAND
Note:
Press to escape from programming mode before step 4.
16