User`s guide

ScanControl
One Program, Multiple Scanners, Made in USA
Copyright  2009 – 3D Technologies Page 59 of 86
Radio Lockouts Screen
The Radio Lockouts Screen provides user access to the frequency and TGID lockout lists kept in the
radio. These lists are normally manipulated through the radio keypad by the user setting lockout
attributes, entering global lockout frequencies or setting lockouts during TGID searches. NOTE: This
screen does not store any lockout data in ScanControl Memory. This data is read directly from
the radio and updated directly to the radio.
Figure 41 – Edit Lockout Settings
• Global Frequency Lockouts Frame – List of current global frequency lockouts in radio. This
list is updated when the Radio Lockouts screen is first opened and then updated again each time
a change is made to the list. Items in the list can be selected by clicking on the L/O# in the list.
o Frequency – Field for entering a new frequency to be added to the lockout list.
o Add – Button to add the frequency in the Frequency field to the Frequency Lockouts list.
o Remove – Button to remove the selected frequency from the Frequency Lockouts list.
The frequency to be removed is selected by clicking on the L/O# of the item in the list.
o Clear List – Clears (removes all) the items in the Frequency Lockouts list.
• TGID Lockouts Frame – List of current Talkgroup ID (TGID) lockouts in radio. This list is
updated when the Radio Lockouts screen is first opened and then updated again each time a
change is made to the list. Items in the list can be selected by clicking on the L/O# in the list