User`s guide

ScanControl

One Program, Multiple Scanners, Made in USA

• Upper Limit – The Upper Limit frequency for the search range.

• Step (kHz) – The frequency step size for the search range. You can choose from the list of

available steps or select Auto to have the radio select the step.

• Delay – The delay value (in seconds) for the search range.

• Mod – The reception mode (modulation) for the search range. You can choose from the list of

available modes or select Auto to have the radio select the mode.

• Att – Checkbox to turn on or off Attenuation for each search range.

• DS – Checkbox to turn on or off Data Skip for each search range.

• CCO - Checkbox to turn on or off Control Channel Only mode for each search range.

• QKey (BCT15, BCD996T Only) – Drop down list box to select the Quick Key # for the

selected search range.

• S/UKey (BCT15, BCD996T Only) - Drop down list box to select the Start Up Key # for the

selected search range.

• Rec - Checkbox to turn on or off Record Out mode for each search range.

• APCO – Drop down list to select APCO Threshold mode: AUTO, MAN or DEFAULT for each

search range.

• THold – Drop down list to select the APCO Threshold value (0 – 63) for each search range.

• Srch w/Scan ON – Checkbox to turn on or off Search with Scan mode for each search range.

• Srch w/Scan Hold – Drop down list to select the Hold time (in seconds) for Search with Scan

hold for each search range.

• Operations Controls

o Load Ranges – Loads all 10 search ranges from the scanner’s radio memory into the

ScanControl Memory Area.

o Prog Ranges – Programs all 10 search ranges into the scanner’s radio memory.

o Reset Ranges – Resets all 10 search ranges to their default settings in the ScanControl

Memory Area. NOTE: This function DOES NOT clear the data for the custom search

ranges in the scanner’s radio memory.

o Help Button - Click to open this Help file.

o Close Button – Click to close the Edit Custom Search Ranges Screen and return to the

Main Control Screen.