User`s guide

ScanControl
One Program, Multiple Scanners, Made in USA
Copyright  2009 – 3D Technologies Page 45 of 86
of data so in the example above you could have highlighted both the “Zone C3 Talkgroups”
AND the adjacent zone talkgroups in one copy action. In fact you can highlight ALL the
talkgroup IDs on the entire page for the entire system in one copy action.
Open the ScanControl System Editor and create a new Talkgroup ID group or open to an existing
group. The DataGrabber can APPEND the TGID rows to the data already in the Group or
PASTE the TGID rows over the data already in the Group. To APPEND the data just click the
DataGrabber Append button. To PASTE the data click the TGID Tag field of the row where you
want the PASTE to start. The DataGrabber Append button label will change to read Paste then
click the Paste button. (NOTE: Your system editor may look slightly different than below
depending on which model radio is in use.)
Figure 33 – DataGrabber Talkgroup IDs
The DataGrabber will process the data rows and advise the user how many Talkgroup IDs were
found and processed.