User`s guide

ScanControl
One Program, Multiple Scanners, Made in USA
Copyright  2009 – 3D Technologies Page 37 of 86
Open the System Editor and create a new system or open to an existing system. BE SURE TO
CORRECTLY SET THE SYSTEM TYPE BEFORE ATTEMPTING THE PASTE /
APPEND. The DataGrabber can APPEND the frequency rows to the data already in the Group
or PASTE
the frequency rows over the data already in the Group. To APPEND the data just
click the DataGrabber Append button. To PASTE the data click on the Frequency Tag field of
the row where you want the PASTE to start. The DataGrabber Append button label will change
to read Paste then click the Paste button. (NOTE: Your system editor may look slightly
different than below depending on which model radio is in use.)
Figure 27 – DataGrabber:Conventional Frequencies
The DataGrabber will process the data rows and advise the user how many frequencies were
found and processed. In the example above the DataGrabber has detected that some rows
contained frequency pairs: both frequencies and inputs. The DataGrabber asks the user if he /
she wants to paste both the primary frequency and the input or just the primary frequency.