User`s guide

ScanControl
One Program, Multiple Scanners, Made in USA
Copyright  2009 – 3D Technologies Page 29 of 86
Figure 23 - Group Data Frame - Talkgroup IDs – SC230, BC246T, BR330T, BCD396T
• TGIDs in Group Section – Talkgroup data entry fields for the selected Group.
o # – Displays the Talkgroup number in the group. These numbers cannot be edited.
o TGID – Data entry field for the Talkgroup ID. This can be up to a 6 digit number as
assigned by the Trunked radio system. Four formats are valid for Talkgroup IDs: Type
II / LTR format (000000), Type I format (000-0[0]), EDACS AFS format ([0]0-000) and
EDACS decimal format (000000) without leading zeros. ScanControl edits the ID entries
and checks for valid format based on trunk system type defined for the system you are
programming.
o TGID Tag - Data entry field for the alphanumeric tag associated with the selected
Talkgroup ID. This tag is stored in the ScanControl Memory Area and data file.
o L - Checkbox to designate Lockout attribute ON or OFF for a Talkgroup ID within a
Group.
o R - Checkbox to designate Record Out attribute ON or OFF for a Talkgroup ID within a
Group.
o Alt (BR330T, BCT396T, BCT15, BCD996T Only) – Text box displaying the Alert
mode for the selected Talkgroup ID. Clicking on this box will open the TGID Alert
Select screen for editing the Alert settings (See Below).
o Altl (BR330T, BCT396T, BCT15, BCD996T Only) – Text box displaying the Alert
volume level for the selected Talkgroup ID. Clicking on this box will open the TGID
Alert Select screen for editing the Alert settings (See Below).
o Aud (BCD996T Only) - Text box displaying the Audio type for the selected Talkgroup
ID. Clicking on this box will open the TGID Alert Select screen for editing the settings
(See Below).