User`s guide

ScanControl
One Program, Multiple Scanners, Made in USA
Copyright  2009 – 3D Technologies Page 22 of 86
o Add New Button – Click to add a new system into the ScanControl Memory Area.
NOTE: To maintain data integrity between the radio and ScanControl Memory the
program will not allow duplicate system names to be entered. If you try to create a new
system with a name identical to an existing system ScanControl will display an error
message and ask you to choose another name.
• Site / Group Frame – Used to create, configure, edit, update, copy, print, program and load Site
and Group level data for each site and group associated with the selected system.
Figure 16 - Site Frame - Edit Systems – BCT15, BCD996T
Figure 17 - Group Frame - Edit Systems – SC230, BC246T, BR330T, BCD396T
o Site Type – Drop down box to select the type of Trunked site being programmed. The
Trunk site type determines the operating mode of the Trunked frequencies for that
system. All choices represent the different Trunked modes available for the connected
radio type.
o Site Mod - Drop down list box to select the site modulation mode for the selected
system.
o Site Q Key – Drop down list box to select the Quick Key # for the selected Site.
o Site S/U Key – Drop down list box to select the Start Up Key # for the selected Site.
o Site Hold – Drop down list to select the hold time, in seconds. Hold time is the amount
of time the scanner scans a site before moving to the next unlocked site.
o Site P25 Mode – Drop down list box to select the P25 Mode for digital audio Trunked
sites. See the radio Owner’s Guide for details on this setting.
o Site P25 Threshold – Drop down list box to select the P25 Threshold for digital audio
trunked sites. See the radio Owner’s Guide for details on this setting.
o Site State (BCT15 Only) - Drop down list box to select the state / province for location
based scanning. Trunked sites.
o Site GPS Enable (BCT15, BCD996T Only) – Checkbox to enable / disable GPS
location mode for location based scanning. Trunked sites.
o Site Range (BCT15, BCD996T Only) – Drop down list to select distance in miles for
the radius of a circle surrounding the transmitter location. Used during location based
scanning. Trunked sites.
o Site LAT / LONG (BCT15, BCD996T Only) – Latitude / Longitude coordinates of
transmitter in degrees, minutes, seconds & hundredths of seconds. Trunked sites.