User Guide

Searching

Custom Search

Custom Search lets you program and search 10 custom

search ranges. You can search any of these ranges

simultaneously and select each custom search range you

set. During custom search, the scanner searches starting

with the lowest frequency in the search range you select

to the highest frequency in the range.

Notes:

• Search ranges are preset. See “Editing a Custom

Search Range” on Page 80 to change the range.

• You cannot turn off all custom search ranges.

1. Press then turn the scroll control until Search

For ... appears. Then press E. Or, press + Src,

then select No. One of the search feature options

appear.

2. Turn the scroll control until CUSTOM Search appears,

then press E to select it. The scanner starts custom

search of the custom search range you selected,

stopping on any transmission it finds and displaying

the frequency. Turn the scroll control to change the

search direction. An arrow appears, showing the

current search direction.

To turn search ranges on or off, press 0 and 1-9.

To hold searching, press Hold. To resume searching,

press then press Scan/Srch or Hold again.

To lock out a frequency found while searching, press

L/O. Search Lockout? appears. Press E to lock out

the frequency or No to continue monitoring.

If you turn off the active custom search range, the

scanner skips to the next custom search range and

continues searching.

Note: If all frequencies in all active custom search

ranges are locked out, All Locked! appears and the

scanner does not search.

Func

Searching