User Guide

Programming/Editing Optional Settings

On - the scanner tracks I-calls

Off - the scanner ignores I-calls

Only - the scanner only tracks I-calls and ignores other

radio traffic on the system.

Note: The default setting is Off.

Setting Emergency Alert

(Motorola and EDACS Systems Only)

 Program SysteMS  E 

Select the system  E 

Edit Sys Option  E 

Set EMERGENCY ALERT  E

This setting determines how your scanner handles radio

traffic that has the emergency flag set. Select your setting

then press E.

Alert - the scanner sounds an alert beep to notify you of

the emergency transmission.

Ignore - the scanner does not alert you to emergency

transmissions.

Note: The scanner defaults to Ignore.

Setting the EDACS ID Format

EDACS talkgroup ID's are commonly provided in one of

two formats: AFS and Decimal. This setting determines

how you enter EDACS ID's and how the scanner displays

them.

AFS Format - the scanner uses AFS format for talkgroup

ID's

Decimal Format - the scanner uses decimal format for

talkgroup ID's

Notes: