Radio User Manual

ManualsBrandsUniden ManualsRadioBC246T

77

Programming/Editing Optional Settings

Note: The default setting is AUTO.

Setting Channel Attenuation

(Conventional Channels Only)

 program system  E 

Select the system  E 

Edit Group  E 

Select the group  E 

Edit Channel  E 

Select the channel  E 

Set Attenuator  E

This setting controls whether the scanner attenuates

signals on this channel. Select your setting, then press E.

On - the channel is attenuated by about 18 dB.

Off - the channel is not attenuated.

Notes:

• The default setting is Off.

• For trunked systems, the attenuation is a system-

level setting.

• You can also toggle this setting by holding on the

channel and pressing and E.

Setting the Frequency Step

(Conventional Channels Only)

 program system  E 

Select the system  E 

Edit Group  E 

Select the group  E 

Edit Channel  E 

Select the channel  E 

Set Step  E

Menu

Func

Menu

BC246T Paper OM 062405.fm Page 77 Tuesday, June 28, 2005 10:12 AM