Radio User Manual

ManualsBrandsUniden ManualsRadioBC246T

75

Programming/Editing Optional Settings

Setting Channel Alert

 program system  E 

Select the system  E 

Edit Group  E 

Select the group  E 

Edit Channel  E 

Select the channel  E 

Set Alert  E

This setting controls whether the scanner will alert you

when the channel becomes active. Select your setting,

then press E.

On - the scanner beeps when the channel becomes active.

Off - no alert sounds.

Notes:

• Channel alert does not work if key beep is turned off.

• The default setting for channel alert is Off.

Setting CTCSS/DCS

(Conventional Channels Only)

 program system  E 

Select the system  E 

Edit Group  E 

Select the group  E 

Edit Channel  E 

Select the channel  E 

Set CTCSS/DCS  E

This setting controls how a subaudible CTCSS or DCS is

used for the channel. Select your setting, then press E.

Off - any signal opens squelch.

Search - the scanner searches for and displays any

CTCSS or DCS tone that accompanies the transmission.

Menu

Menu

BC246T Paper OM 062405.fm Page 75 Tuesday, June 28, 2005 10:12 AM