Radio User Manual

Programming/Editing Optional Settings

On - the scanner tracks I-calls. Press E to select.

Off - the scanner ignores I-calls. Press E to select.

Only - the scanner only tracks I-calls and ignores other

radio traffic on the system. Press E to select.

Note: The default setting is Off.

Setting Emergency Alert

(Motorola and EDACS Systems Only)

 program system  E 

Select the system  E 

Edit Sys Option  E 

Set EMERGENCY ALERT  E

This setting determines how your scanner handles radio

traffic that has the emergency flag set. Select your setting

then press E.

Alert - the scanner sounds an alert beep to notify you of

the emergency transmission.

Ignore - the scanner does not alert you to emergency

transmissions.

Note: The scanner defaults to Ignore.

Setting the EDACS ID Format

(EDACS Systems Only)

 program system  E 

Select the system  E 

Edit Sys Option  E 

EDCS ID Format  E

EDACS talk group ID's are commonly provided in one of two

formats: AFS and Decimal. This setting determines how

you enter EDACS ID's and how the scanner displays them.

AFS Format - the scanner uses AFS format for talk group ID's

Decimal Format - the scanner uses decimal format for

talkgroup ID's

BC246T Paper OM 062405.fm Page 69 Tuesday, June 28, 2005 10:12 AM