Radio User Manual

Programming/Editing Optional Settings

ID Search - the scanner stops on any transmission for

unlocked talk group ID's.

Note: You can also change this setting by pressing Scan

while scanning the system.

Setting the Base Frequency/Step/Offset

(Motorola UHF/VHF Systems Only)

 program system  E 

Select the system  E 

Edit Sys Option  E 

Edit Band Plan  E 

Select Plan  Select a band plan (1, 2, or 3)  E 

Input Base Freq  Input the base frequency  E 

Select Step (5 kHz, 12.5 kHz, 25.0 kHz, 37.5 kHz, 50.0

kHz, 62,5 kHz, 75.0 kHz, 87.5 Khz, or 100.0 kHz)

 E 

Offset (380-759)  Input the offset  E

This setting lets you enter the base frequency, step, and

offset for the band plan you select. This information lets

you set the scanner so it will scan a Motorola UHF/VHF system.

Setting Data Skip

(Conventional Systems Only)

 program system  E 

Select the system  E 

Edit Sys Option  E 

Set DATA SKIP E

This setting controls how the scanner behaves when it

stops on a channel that has a data signal.

On - the scanner stops briefly on the channel, but then

immediately resumes scanning automatically. Press E to

select.

Off - the scanner remains on the channel until the

transmission stops. Press E to select.

BC246T Paper OM 062405.fm Page 66 Tuesday, June 28, 2005 10:12 AM