Radio User Manual

Programming Radio Systems

• See “Entering/Editing the Group Name” on Page 71

• See “Setting the Group Quick Key” on Page 72

• See “Deleting Groups” on Page 73

• See “Editing the Channel Name” on Page 73

• See “Setting Group Lockout” on Page 72

Entering/Editing EDACS Channels



 Edit Channel  E 

  NEW Channel E  Input TGID

Enter the talk group ID for the channel, then press E.

Notes:

• If you have selected to use AFS format for talk group

ID's (the default), press to enter a hyphen.

• To enter an I-Call ID, press , then enter the ID.

• If you omit the fleet and/or subfleet, the scanner

treats these fields as wildcards.

Note: Press to enter a hyphen.

Then, refer to the appropriate section to change a

channel setting:

• See “Editing the Channel Name” on Page 73

• See “Setting Channel Alert” on Page 75

• See “Setting Channel Lockout” on Page 78

• See “Deleting Channels” on Page 78

• See “Copying/Pasting Channels” on Page 79

To program another channel within the same group, press

, then repeat the above. To create another channel

group and enter more channels, press three times,

then proceed from “Entering/Editing EDACS Channel

Groups” on Page 59.

Programming LTR Systems

 Program SysteM  E 

New System  E  LT 

E  Confirm?  E

BC246T Paper OM 062405.fm Page 60 Tuesday, June 28, 2005 10:12 AM