Radio User Manual

Programming Radio Systems

• See “Reviewing Locked Out Frequencies” on

Page 89

• See “Setting System Attenuation (Trunked Systems

Only)” on Page 70

• See “Deleting Systems” on Page 71

• See “Copying Systems” on Page 71

• See “Setting System Frequencies” on Page 56

• See “Entering/Editing Motorola Channel Groups”

on Page 56

Setting System Frequencies

SET FREQUENCIES  E

 New FREQUENCY  E

Input a system frequency, then press E.

To enter additional frequencies, press , use the scroll

control to select New Frequency, then repeat the above.

Note: If you select Control Channel Only mode (see “Set-

ting Control-Channel Only (Motorola Systems Only)” on

Page 70), you only need to enter the frequency(s) that

can be assigned as the control channel. Most frequency

lists usually indicate which of the frequencies are the

control channel frequencies. Otherwise, you must enter

all of the frequencies.

Entering/Editing

Motorola Channel Groups

To enter channels in a system, first set up a channel

group (or groups) to hold the channels. Then, enter the

channel and channel parameters in the group(s).

Setting Up a Channel Group

 Edit Group  E  New Group  E

The scanner creates a group with a default name of

Group nn. nn increments by one for each new group you

create within a system.

BC246T Paper OM 062405.fm Page 56 Tuesday, June 28, 2005 10:12 AM