Specifications
Table Of Contents
- Welcome
- Installing the Phone
- Getting to Know Your New Phone
- Using the Interface
- Basic Setup
- Setting Up the Phonebook and Speed Dial
- Creating Phonebook Entries
- Finding a Phonebook Entry
- Editing an Existing Phonebook Entry
- Storing Caller ID or Redial Numbers in the Phonebook
- Deleting a Single Phonebook Entry
- Deleting all Phonebook Entries
- Copying Phonebook Entries to Another Handset
- Programming Base One-touch Dial Numbers or Speed Dial Numbers
- Customizing Your Handsets
- Using Your Phone
- Using Caller ID, Call Waiting, and Redial Lists
- Adjusting the Ringer, Earpiece and Speaker
- Finding a Lost Handset
- Using Hold, Conference and Transfer
- Using Special Features
- Maintenance
- Troubleshooting
- Precautions!
- One Year Limited Warranty
- Index
7
8
Installing the Phone
Charging the Handset
Place the handset in the base
cradle with the display facing
forward.
If you have an accessory handset,
place it in the charging cradle with
the display facing forward.
Make sure that the
charge/in use LED
illuminates when the
handset is seated.
What if the charge/in use LED or charge
LED doesn’t light up?
Reseat the handset; make sure the contacts
on the bottom of the handset are lined up
with the contacts in the cradle.
Check the AC adapter connection.
Make sure you are not using an outlet that’s
controlled by a wall switch.
Make sure that the charge
LED illuminates when the
handset is seated.
Charge your handset at least 15 to 20 hours before plugging into the phone line.
Place the handset in the base
cradle with the display facing
forward.
If you have an accessory handset,
place it in the charging cradle with
the display facing forward.
Make sure that the
charge/in use LED
illuminates when the
handset is seated.
What if the charge/in use LED or charge
LED doesn’t light up?
Reseat the handset; make sure the contacts
on the bottom of the handset are lined up
with the contacts in the cradle.
Check the AC adapter connection.
Make sure you are not using an outlet that’s
controlled by a wall switch.
Make sure that the charge
LED illuminates when the
handset is seated.
Charge your handset at least 15 to 20 hours before plugging into the phone line.