Specifications

39
40
Finding a Lost Handset
To locate a misplaced handset, press [int’com] on the base when the phone is in standby. Press [1] through [9], [0]
to select the handset you want to page, or press
[
*
/tone] to page all registered handsets. To cancel paging, press
[int’com] on the base again.
Using Hold, Conference and Transfer
Placing a Call on Hold
During a call, press [clear/int’com] on the handset or [int’com] on the base to place the caller on hold. If you
leave a caller on hold for more than ten seconds, the handset display will read, Line On Hold.
To return to the party on hold, press
[ /ash] or [ ] on the handset or [ ] on the base. The phone will return
to the holding party.
Notes: • You can only place a caller on hold for ve minutes. Once ve minutes has passed, that party’s line will be
disconnected and the phone will return to standby.
• While a call is on hold, Call Waiting and CID on Call Waiting do not work.
Conferencing
If you have more than one handset, up to four people can
participate in a conference call. A four-way conference call
consists of an outside line, two handsets, and the base
speakerphone. You can easily join a call already in progress.
Press
[ /ash] or [ ] on the handset or [ ] on the base
to join the call.
To hang up, return the handset to the cradle or press
[ ] on
the handset or
[ ] on the base. The other party will still be
connected to the call.
1)
2)
1)
2)
Finding a Lost Handset
Using Hold, Conference and Transfer
Outside call
Handset #1
Handset #2
Base speakerphone