Specifications

35 36
36
Using Caller ID, Call
Waiting, and Redial Lists
Using Call Waiting
If you have Call Waiting service and a second call comes in when you are on the phone, a call waiting tone will sound.
Press
[ /ash] on the handset or [ash] on the base to accept the waiting call. There is a short pause, and then you
will hear the new caller. To return to the original caller, press
[ /ash] on the handset or [ash] on the base.
Note: You must subscribe to Call Waiting service for this feature to operate. Not all features are available in all areas.
Redialing a Number
You can quickly redial the last ve numbers dialed on each handset or the last number dialed on the base.
From the handset:
With the phone in standby, press the
[redial/pause] to open the redial list.
Use
[ ] and [ ] or [redial/pause] to scroll through the redial list.
When you nd the number you want to dial, press [ /ash] or [ ].
Notes: • If the number exceeds 32 digits, only the rst 32 digits are retained in redial memory.
• If the redial memory is empty, EMPTY appears in the display and you will hear a beep.
• You can also press
[ /ash] or [ ] before you open the redial list.
Find the phone number you want to dial, and then press
[menu/select].
From the base:
Press
[ ].
Then press
[redial].
Note: If the number exceeds 32 digits, only the rst 32 digits will be dialed.
Deleting a Redial Record
If you want to delete a phone number from the handset’s redial list, follow the steps below:
With the phone in standby, press
[redial/pause].
Use
[ ] and [ ] to scroll through the redial list.
When you nd the redial number you want to delete, press [menu/select] and select DELETE ENTRY.
When the phone asks you to conrm, select YES. The redial number is deleted.
1)
2)
3)
1)
2)
1)
2)
3)
4)