Specifications

TROUBLESHOOTING [58] www.uniden.com
The handset doesn’t
communicate with the main base
or the other handset.
• Re-register both handsets (see page 13).
No 3-way conversation. • Only one handset at a time can talk with an outside caller. To allow the other handset to talk to
the caller, transfer the call.
The answering system does not
work.
• Make sure the AC adapter is plugged into wall outlet.
• Make sure the answering system is turned on.
The answering system does not
record any messages.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
Messages are incomplete. • The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
After a power failure, the
outgoing message is deleted.
• Record your personal outgoing message again. The default message should remain.
No sound on the main base
speaker during call monitoring
or message playback.
• Adjust the speaker volume on the main base.
Cannot access remote call-in
features from another touch-
tone phone.
• Make sure you're using the correct PIN code.
• Make sure that the touch-tone phone you're using can transmit the tone for at least two
seconds. If it cannot, you may have to use another phone to access your messages.
Symptom Suggestion
TROUBLESHOOTING