User Manual This manual includes product specifications and instructions for SQ-3500 phone operation. This manual must be read before operating the product. The SQ-3500 phone access point is required to use this product. Usage of the SQ-3500 access point provided in the full package is recommended.
Safety Precautions Do not put the SQ-3500 in heating appliances such as heaters and microwave ovens to dry it if the device is wet. This can cause explosions, deformation, or other problems. If this occurs, free services shall not be provided. Do not use the SQ-3500 in places that are too hot or too wet (keep it indoors between 0 ℃ and + 50 ℃). If the device gets wet with rain, or through spilled beverages, or is used in extremely hot/wet places such as public saunas, it can cause battery explosions.
Safety Precautions Do not hold the SQ-3500 to your ears to turn on the power. This can cause hearing impairments or physical injuries. Do not look at the infrared window in a direct way when using the remote control. this can cause visual impairment. Refrain from the use of SQ-3500, and leave the power cord for the charger unplugged when it is thundering and flashed lightning. Thunderbolts can cause severe physical injuries or fires. Do not disassemble the SQ-3500 temporarily, or apply shocks to device.
Index Safety Precautions………………………………………………………………………………....................................................................................1 Basic Components...………….…………………………………………………………………………………….….…...………………………….……4 Battery Replacement….…………………………………………………………………………………….......….……………………………….……...5 Time Taking to Charge / Battery Life………………...………………………………………………………….……………………………………….6 Inserting / Removing a micro SD card…..…………………………………………………………………….
Basic Components The Basic Components as shown below may be different from the original. For safety in use, please purchase authentic products. If you want to purchase additional batteries or chargers, contact your dealer.
Battery Replacement Battery Replacement Use only batteries authorized by the company when you replace batteries, following the diagram below. CAUTION RISK OF EXPLOSION IF A BATTERY IS REPLACED WITH AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Battery installation method Battery removal ① ② ② ③ ① If the battery is inserted upside down, the SQ-3500 phone will not work. Please turn off the power before removing the battery from the SQ-3500 phone.
Time Taking to Charge / Battery Life Charge the battery Charge the battery after purchasing the product as it is not fully charged. Charging with the desktop charger Features Charging Charging Complete Charging Lamp RED GREEN ※ Lamp on the charger flickers? Separate the battery from the charger, and then re-fits into the charger. It is still flickering? Then, cleans the charging terminal and charge the battery. (When the lamp doesn‟t stop flickering, apply to the dealer.
Time Taking to Charge / Battery Life Time Taking to Charge / Battery Life ※ Battery life varies with the environment temperature, battery age and movement of the user.
Inserting / Removing the Micro SD card Inserting the micro SD card Use Only compatible micro SD cards approved by UniData for use with this device. UniData uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card, the device and corrupt data stored on the card. The phone supports micro SD cards up to 8GB. 1. 2. 3. Open the side cover of the micro SD slot.
Power On / Off If you want to turn on the power, keep pressing for 3 seconds or more. If you want to turn off the power, keep pressing seconds or more. for 3 If anything abnormal takes place, or if the power button does not work while using a Wi-Fi phone, start the phone after removing and inserting the battery.
Names & Function of Device Parts 19 21 14 1 Send Key Used for receiving and making call 2 End Key Used to end a call and to switch the power ON/OFF 3 Clear Key Removing characters or moving to previous screen. 4 Vibration shortcut Press and hold to vibrate 5 Key Lock Lock and unlock the keypad.
Display Indicators Signal strength Out of call coverage area Call trial or connection Call not available You have selected the sound setting Mute button, displayed when the volume is set to “0” Vibration Mode Silent Mode An Alarm is set You have one or more unread messages in the Inbox folder Setting to call forwarding service Remaining battery life Full Low Connecting to network 11 Empty
Calling Method Voice Calls Call Connect In standby, enter the numeric keys and then press the key ※ Call quality may be reduced at increased distance away from the access point.
Calling Method Video Calls Call connect In standby, enter the numeric keys and then press . ※ Call quality may be reduced at increased distance away from the access point.
Calling Method Call logs Redialing recently used numbers You can make voice or video calls by dialing recently used numbers (incoming, outgoing, missed, received/sent text messages). During stand-by, press the SEND key and then select the phone number you want to call. - Select VIDEO in the menu if you want to make a video call. Speed dialing You can speed dial saved numbers to make calls quickly and easily. During stand-by, enter the speed dial number but press the last number longer to make a call.
Calling Method Number Key Auto-search Press a part of the number you want to call to auto-search the phonebook and display the results. Select a phone number and press the OK key. -Press the VIDEO key to make a video call.
Using the Menu During a Voice Call Using the menu during a voice call Making a voice call •Refer to page 12. Mute: This function stops your caller from hearing your voice temporarily. The caller's voice can still be heard. Taking a voice call Press the SEND key to take an incoming call. Press the END key to reject an incoming call.
Using the Menu During a Video Call Making a video call Using the menu during a video call Change Camera: To converts the current video preview to back or front camera sight. Preview Off: Off the preview. Mute: This function stops your caller from hearing your voice temporarily. The caller's voice can still be heard. View my picture: Turns off your picture and displays your caller's picture only. (Changes to 'Hide my picture' when your picture is in display.) •Refer to page 13.
Missed call If you have a missed call, press , and the last one of those calls will be answered.
Call Transfer / Hold / Waiting Transferring a call While you are on active call, you can announce that you are transferring the active call to another party, or you can directly transfer the call. 1. Press the to put the call on HOLD. 2. Dial the 3rd party numbers and place a new call 3. Select the left selection key (Menu > Transfer) while 3rd party is connected to execute transfer function.
Phone Book Right select key Left selection key for shortcut ( Menu > Contacts > Search contacts ) Enter a part of a name, phone number or e-mail address to search for a phone number. Search all: Search by a part (more than 1 character) of a name, phone number or e-mail address. Search by letter or digits: Enter letters or digits, then all names starting with these letters/digits will be displayed.. Search by group: Select a group to search in (unspecified, standard groups, custom groups).
Phone Book 1. Phone Number Search - Menu (for a saved number) 2. Phone number search – video call 1. Press the have selected. to make a video call from the phone book you - The phone number selected must be compatible with video calling. - A video call will be converted to a voice call if the dialed number does not support video calling or if the video call receiver is in an area where video calls cannot be made. 3. Add new contacts – from phonebook 1.
Phone Book 1. Phone Number Search - Menu (for a saved phone number) 4. Phone Number Search - Delete Press and select > Delete from Phone Book menu. Delete the selected number. 5. Phone Number Search – Selection delete Press and select > Delete all you selected from Phonebook menu. 6. Phone Number Search – Delete All Press and select > Delete all from Phonebook menu. Press „Yes‟ after entering the password to delete all saved numbers.
Phone Book 2. Add new contacts ( Add contacts ) Menu > Contacts > Add a new phone number and other details. Up to 1,000 phone numbers can be saved. ※ Each type of phone number can be selected. If more than 2 phone numbers are to be saved, one phone number must be selected as the main phone number. Name Save a name. (Up to 48 alphabet characters) Group Assign a group. Use direction key to assign the group. Phone Number Save a phone number. Select a main phone number and phone number type.
Phone Book You can add new number in standby mode. Dial a phone number and press SAVE during stand-by to save phone numbers.
Phone Book 3.To set speed dial, select ( Menu > Contacts > Speed dial ) Set speed dial numbers for phone numbers saved in the phone book that are frequently called (up to 99 speed dial numbers can be saved). 1. Select a speed dial number and press SET. View Speed Dial Number List: Displays a list of saved speed dial numbers. 2. Search for a phone number in the phone book. Clear All: Clears all saved speed dial numbers. 3. Select a phone number and press SELECT to complete the setting.
Phone Book Group Settings ( Menu > Contacts > Group Settings )+ Edit a group to assign a phone number or add a new group. Select a group to edit and change the group name and ring tone. Group name: Enter a group name (24 alphabet characters) Up to 10 groups can be set. Group ring tone: Assign a ring tone to a group. ※ Incoming call from a phone number assigned to a group will sound the selected ring tone. However, the group ring tone will be ignored if another ring tone is assigned in the phone book.
Messaging In messaging, you can read, write and send messages.The messaging service can only be used if it is supported by your network or service provider Left selection key ( Menu > Messaging ) or press the shortcut key Create a text message Select Menu > Messaging > New message 1. Enter the message. 2. To add symbol and emoticon during writing a text, select menu 3. To add recipients, scroll to the To field, and enter the recipient‟s number or select Search to add recipients from the available options.
Display Display settings Select the left selection Menu > Display There are 4 options included in Display Settings Wallpaper Select Menu > Display > Wallpaper This feature enables you to set a picture as a wallpaper image in your phone‟s stand -by screen.
Sound Settings Bell Select left selection Menu > Sound settings > Bell to change the type of the bell type Bell mode Select menu > Sound settings > Bell mode to choose how the phone notifies you of an incoming voice call. The alert type allows you to choose between Ringing(Ringtone), Vibrating and Silent. Volumes To adjust the ring volume and incoming message alert volume.
Tools Alarm To set an alarm, Select left selection Menu > Tools > Alarm > Speed alarm. When an alarm is activated, the alarm indicator will be displayed. To dismiss the alarm and return to standby mode, press or Tools > Unit converter From this submenu you can use unit converter of Length, Weight, Width, Bulk and Temperature.
Multimedia Multimedia To optimize the use of Multimedia, insert a memory card in your device. To use multimedia, Select left selection Menu > Multimedia The player supports files formats such as MP4, MP3, JPG, PNG, GIF and BMP.
Logs Select left selection Menu > Logs > Call history Log information about the communication history of the device. The device registers missed , received calls and SMS history up to 100.
Settings Press the shortcut key Left selection key ( to set to Wi-Fi Menu) > Setting > Wi-Fi ) Wi-Fi Settings. If you select Wi-Fi, the following display will appear: 1. Display registered Wi-Fi profile (Top) • SQ-3000 can be registered Wi-Fi up to 4 • If there is no registered Wi-Fi profile, Wi-Fi profile do not appear 2. Display scanned AP list.
WLAN Settings Wi-Fi Menu lists • Refresh: Refresh the scanned AP • Detail: Detail information of selected AP • Profile add: Add new profile. • Delete: Delete selected item ( It will be displayed on the menu when you select the registered AP list ) • View registered: See registered Access Point ( It will be displayed on the menu when you select the registered AP list ) • Change touch: It shows the icons for the Access Points that you searched. And you can drag the icon to connect to the access point.
WLAN Settings Wi-Fi Settings. 2. Add profile from AP list Select add 1) SSID setting: Enter SSID name 2) Security setting: You can configure security to use. (WEP/WPA-PSK/WPA-EAP/WPA2-PSK/WPA2-EAP) 3) Account/Password:You can configure the ID/PWD and Mode(MD5/PEAP/TTLS) for authentication 4) STUN:You can configure server and port of NAT 5) Networking setting : You can set Network DHCP or manually 3. Add profile as Temporary Select OK or Temp 1) Security setting: You can configure security to use.
User Settings Reset to default Left selection key ( Menu) > Settings > User settings > Reset to default ) To reset all preference settings and delete all personal data, such as contacts, message, WLAN and SIP information 36
Picture Frame Settings Digital Photo Frame You can use the SQ-3500 as a Digital Photo Frame when it‟s on the cradle. To make a digital photo frame with the SQ-3500, copy images to the Micro SD card and insert Micro SD card into the SQ-3500.
Time-zone Time-zone NTP server To define your time zone, select Left selection key ( Menu) > Settings > Time-zone) To update the time, date, and time zone information with the NTP server automatically, select Left selection key ( Menu) > Settings > System > NTP server) You can select country and city of the country.
Call Forwarding Call Forwarding To set the divert setting to on, select Left selection key ( Menu) > Settings > Call Forwarding) With call forwarding, you can direct your incoming calls to another number. Select the forwarding option you want from Unconditional(when you want to divert all incoming calls), Busy(when your number is busy) to No Answer (when you don‟t answer an incoming call).
Information Left selection key ( Menu) > Settings > Information) You can see the setting information of Wi-Fi phones. Basic Info. Network info. My phone number, Firmware version, MAC address Displays the IP address, netmask, gateway and DNS address. Wi-Fi Info. Displays the access point or wired/wireless router the Wi-Fi phone is connected to.
System Settings SIP Settings. Left selection key ( Menu) > Settings > System > SIP You can set the information of the SIP server. SIP Account. * You can select symbol in Phone number, User name, Domain, Proxy. If you select SIP, the following options will appear: Left selection key ( • Phone number – Enter your registered phone number from SIP server • User name – Enter your authorized user ID • Password – Enter your authorized password • Domain – Enter the SIP server‟s domain address.
System Settings NTP server Please refer to page 38.
Before going to Service Center Wi-Fi phone cannot start. • Check whether it is correctly installed. • Check whether battery is fully charged. • Press the power button of Wi-Fi phone. • If it shows no response to that, remove battery, and install it again. Wi-Fi phone shows “poor call condition” during calls The battery is full, but the phone keeps turned off? • Separate the battery from the phone, and then, re-fits into the phone and turn it on.
Before going to Service Center Calls are not made If calls are not made on Wi-Fi phones after installing AP, check Internet connection, and then the following. • If Wi-Fi phone screen displays and , check the following If Wi-Fi phone displays in signal strength, check if the wireless condition indicator of AP, lights of its lamp, and turn off and on the power of Wi-Fi phone after temporarily maintaining a distance of 1.5-3 meters between AP and Wi-Fi phone.
Specification Product Specification 인증번호: UDC-SQ-3500-VA(B) Certified Company UniData Communication Systems, INC. Device Name Wireless Data Communication system wireless appliance Model SQ-3500 Certification Number FCC ID: SQMSQ-3500 CANADA IC: 6303A-SQ-3500 Manufacture UniData Communication Systems, INC.
Specification FCC ID: SQMSQ-3500 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment.
http://www.udcsystems.
