User's Manual
Table Of Contents
- Copyright © 2020 San Jose Technology, Inc. All Rig
- This document contains information that is the pr
- 2
- Document Amendments
- Specification
- Package Contents
- Front View
- SJ-205HAB Quick START/Setting Guide
- STEP 1: APN Identification. Ensure APN Name, APN u
- STEP 2: Send SMS command to device (Check the IMEI
- STEP 3: Send SMS command to device to set up APN:
- default: #username,0000,3,internet,,*(if empty, le
- STEP 4: Send SMS command to point to TCP server: #
- STEP 5: Send SMS command to device to report via T
- SETP 6: Set RTC Time：#username,0000,setrtc,1610121
- 10
- Command Setup for SJ-205HAB
- Change User Name
- Change Password
- Request IMEI Number
- Set up APN for mobile network Service
- Set up URL
- Set up TCP ACK function
- Set up Phone Book List
- Set up Location Auto Report Mode
- Set up Answer Call Mode
- Set up Mandatory Polling report
- Set up Route for Data Transmission
- Get Pairing Information
- Set up Auto Reboot Time
- Set up TCP/UDP Server Address
- Set up Turbo Link Mode
- Set up Command By GPRS
- Set up Device Position
- Set up RTC time
- Set up Tamper Function
- Set up Vibration Detection Function
- Set up Alarm OFF
- Disable the beep sound when alarm event is trigge
- Set up RF power of Home unit
- Set up AES 128 Encryption
- Set up FOTA (Over-the-Air Technology)
- Set up paired with the bracelet (NB5)
- Set up unpaired with the bracelet (NB5)
- IDRST (Clear all of the idpair at the same time)
- RF Command
- Erase the Backup Data(Clear the flash memory)
- Setup buzzing when receiving RF signal
- Setup RFall feature
- Set up Low Power reminder
- Appendix 1: Tracker Event List
- 47
- 48
- 49
- In order to expedite the SANAV repair process, cus
- 1.Neglect, misuse, or abuse, such as incorrect testi
- 2.Placement of unit in extreme environments beyond t
- 3.Subjugation of unit to disassembling, soldering, a
- 4.Any incidental or consequential losses or damages
- 5.Disaster, accidents, use of any inauthentic substi
- 50
- 空白页面
SJ-205HAB User Documentation
Introduction SANAV SJ-205HAB is a low-powered, more compact version of 2G/3G tracker
targeting the animal or asset tracking market. Moving targets can be tracked in
real-time through internet or specified terminals. The device can communicate with
the server through 2G/3G networks, to provide emergency & power alerts, geo-
fencing, remote monitoring, and automatic back-up regarding tracking history.
This User Manual details the product specifications, hardware features, SMS
commands, and Tracker Status of SJ-205HAB. If you have any further questions about
using SANAV’s SJ-205HAB product, please contact SANAV Customer Service at
www.sanav.com.
Disclaimer This document, and all other related products, such as device, firmware, and software,
is developed by SANAV. At the time of release, the product is known to be most
compatible with the specified firmware version. SANAV continuously seeks to research,
develop and improve the functionalities of the devices, which may subject the device
to change in protocol, specification, and firmware functions without prior notice.
SANAV is obligated to modify all documentation without limitation of time frame. A
change notice shall be released to SANAV customers upon the completion of document
modification.
SANAV products are not intended to be used as life support or rescue equipment.
SANAV is not liable for any loss or injury caused by using or referencing any products.
Any possible means of using or integrating SANAV products shall be avoided.
11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: 886-2-22694456｜Fax: 886-2-22694451｜service@unictron.com
4
w
w
w
w
w
w
.u
.
n
sa
ic
n
tr
a
o
v
n
.
.
c
c
o
o
m
m
© Unictron Technologies Corp.
All specifications subject to change without notice.