User's Manual
Table Of Contents
- Copyright © 2020 San Jose Technology, Inc. All Rig
- This document contains information that is the pr
- 2
- Document Amendments
- Specification
- Package Contents
- Front View
- SJ-205HAB Quick START/Setting Guide
- STEP 1: APN Identification. Ensure APN Name, APN u
- STEP 2: Send SMS command to device (Check the IMEI
- STEP 3: Send SMS command to device to set up APN:
- default: #username,0000,3,internet,,*(if empty, le
- STEP 4: Send SMS command to point to TCP server: #
- STEP 5: Send SMS command to device to report via T
- SETP 6: Set RTC Time：#username,0000,setrtc,1610121
- 10
- Command Setup for SJ-205HAB
- Change User Name
- Change Password
- Request IMEI Number
- Set up APN for mobile network Service
- Set up URL
- Set up TCP ACK function
- Set up Phone Book List
- Set up Location Auto Report Mode
- Set up Answer Call Mode
- Set up Mandatory Polling report
- Set up Route for Data Transmission
- Get Pairing Information
- Set up Auto Reboot Time
- Set up TCP/UDP Server Address
- Set up Turbo Link Mode
- Set up Command By GPRS
- Set up Device Position
- Set up RTC time
- Set up Tamper Function
- Set up Vibration Detection Function
- Set up Alarm OFF
- Disable the beep sound when alarm event is trigge
- Set up RF power of Home unit
- Set up AES 128 Encryption
- Set up FOTA (Over-the-Air Technology)
- Set up paired with the bracelet (NB5)
- Set up unpaired with the bracelet (NB5)
- IDRST (Clear all of the idpair at the same time)
- RF Command
- Erase the Backup Data(Clear the flash memory)
- Setup buzzing when receiving RF signal
- Setup RFall feature
- Set up Low Power reminder
- Appendix 1: Tracker Event List
- 47
- 48
- 49
- In order to expedite the SANAV repair process, cus
- 1.Neglect, misuse, or abuse, such as incorrect testi
- 2.Placement of unit in extreme environments beyond t
- 3.Subjugation of unit to disassembling, soldering, a
- 4.Any incidental or consequential losses or damages
- 5.Disaster, accidents, use of any inauthentic substi
- 50
- 空白页面
Table 15: Location Auto report Mode Setup Format Description
Table 16: Location Auto report Mode Setup Response Descriptio
11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: 886-2-22694456｜Fax: 886-2-22694451｜service@unictron.com
21
w
w
w
w
w
w
.u
.
n
sa
ic
n
tr
a
o
v
n
.
.
c
c
o
o
m
m
Note: You may limit the number of the Auto Reports by inputting the digits from 1 to 9998 in the<total number
of reports>field. When you input 9999, the device will generate unlimited Location Auto Reports. when 0 is
entered, the device will stop/disable Location Auto Report Mode.
Set up Location Auto Report Mode
Generally, the device will generate GPS (GPRMC) data and report to server, specified cellular phone or network
routes. Retrospective Location Mode setup can enable the device report GPS data automatically during a period
of time.
Use this command to set up the frequency of Retrospective Location Mode. The device can report according to
time interval. If you send the SMS command as the following example, the device will send a report every 5
minutes (300 seconds) and the total number of reports is 99.
Setup Format: #「USERNAME」,「Password」,「Function Code」,「intervals (sec)」,「total number of report」
*
Example1:#USERNAME,0000,6,300,99*
SMS/ COTA Command
Description
#
Start sign.
USERNAME
Default user name of the device.
If you have changed the USERNAME, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
6
Mode 6 defines Retrospective Location Mode setup mode.
300
Time Interval (period) of Retrospective Location Mode.
99
Times (frequency) of Auto Reports that will be sent automatically.
*
End sign.
Situation
Message Reply
Setup Succeeds
[username] + Setup OK. Device Auto Report setting is updated.
Setup Fail
[username] + Auto Report setting Setup Fail!
Incorrect username,
Incorrect password or
command format
[username] + command error
© Unictron Technologies Corp.
All specifications subject to change without notice.