User's Manual
Table Of Contents
- Copyright © 2020 San Jose Technology, Inc. All Rig
- This document contains information that is the pr
- 2
- Document Amendments
- Specification
- Package Contents
- Front View
- SJ-205HAB Quick START/Setting Guide
- STEP 1: APN Identification. Ensure APN Name, APN u
- STEP 2: Send SMS command to device (Check the IMEI
- STEP 3: Send SMS command to device to set up APN:
- default: #username,0000,3,internet,,*(if empty, le
- STEP 4: Send SMS command to point to TCP server: #
- STEP 5: Send SMS command to device to report via T
- SETP 6: Set RTC Time：#username,0000,setrtc,1610121
- 10
- Command Setup for SJ-205HAB
- Change User Name
- Change Password
- Request IMEI Number
- Set up APN for mobile network Service
- Set up URL
- Set up TCP ACK function
- Set up Phone Book List
- Set up Location Auto Report Mode
- Set up Answer Call Mode
- Set up Mandatory Polling report
- Set up Route for Data Transmission
- Get Pairing Information
- Set up Auto Reboot Time
- Set up TCP/UDP Server Address
- Set up Turbo Link Mode
- Set up Command By GPRS
- Set up Device Position
- Set up RTC time
- Set up Tamper Function
- Set up Vibration Detection Function
- Set up Alarm OFF
- Disable the beep sound when alarm event is trigge
- Set up RF power of Home unit
- Set up AES 128 Encryption
- Set up FOTA (Over-the-Air Technology)
- Set up paired with the bracelet (NB5)
- Set up unpaired with the bracelet (NB5)
- IDRST (Clear all of the idpair at the same time)
- RF Command
- Erase the Backup Data(Clear the flash memory)
- Setup buzzing when receiving RF signal
- Setup RFall feature
- Set up Low Power reminder
- Appendix 1: Tracker Event List
- 47
- 48
- 49
- In order to expedite the SANAV repair process, cus
- 1.Neglect, misuse, or abuse, such as incorrect testi
- 2.Placement of unit in extreme environments beyond t
- 3.Subjugation of unit to disassembling, soldering, a
- 4.Any incidental or consequential losses or damages
- 5.Disaster, accidents, use of any inauthentic substi
- 50
- 空白页面
Set up APN for mobile network Service
Access Point Name (APN) is a protocol that typically allows a user's device to access the internet using the
mobile phone network. It is a network identifier used by a mobile device when connecting to a 2G/3G carrier.
The carrier will then examine this identifier to determine what type of network connection should be created.
For uploading the data to a web server, a set of 2G/3G APN from your 2G/3G network is required. Various
2G/3G networks provide different 2G/3G APN settings. Please ask your 2G/3G carrier about the APN settings.
If the user name and password of APN are indefinite or showed in blank, just leave the parameters empty (no
space). User can follow the Setup Format below to setup the APN that is provided by your 2G/3G carrier.
Setup Format: #「USERNAME」,「Password」,「Function Mode」,「APN」,「APN name」,「APN password」,
「APN DNS」*
Example1: #USERNAME,0000,3,internet,guest,guest,172.20.2.10*
Leave the parameters empty (no space) if other parameters are not required.
Example2: #USERNAME,0000,3,internet,,,*
Note1: The total length of APN name, APN USERNAME, APN Password, and APN DNS should be less than 70
characters.
Note2: Some PREPAID PHONE CARD SIM modules do not enable or even support 2G/3G service. Please consult
with 2G/3G carrier for further information.
Table 7: APN Setup Format Description
11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: 886-2-22694456｜Fax: 886-2-22694451｜service@unictron.com
15
w
w
w
w
w
w
.u
.
n
sa
ic
n
tr
a
o
v
n
.
.
c
c
o
o
m
m
© Unictron Technologies Corp.
All specifications subject to change without notice.
SMS/ COTA Command
Description
#
Start sign.
USERNAME
Default ID of the device.
If you have changed the user name, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
Function Mode
Mode 3 defines the APN setup mode.
internet
APN Name
guest
APN user name (optional)
guest
APN Password (optional)
172.20.2.10
APN DNS (optional)
*
End sign.