User's Manual

11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: [phone]｜Fax: [phone]｜[e-mail]
42
www.etek.com.tw
© Unictron Technologies Corp. All specifications subject to change without notice.
www.sanav.com
www.unictron.com
AES128 encryption function setting
Set <Encryption Mode> to 1 to enable it such like this command: #username,0000,aes,1*.
Setup Format: #<User Name>, <Password>, <Function Code>, <Encryption Mode>*
Command: #username,0000,aes,1*
Table: AES128 encryption Setup Format Description
Situation
Description
Success
[username] + setup OK. Device data for aes128 protection is switched off. / on.
fail
[username] + , command error.
Table: AES128 encryption Setup Response Description
SMS Text
Description
#
Start sign.
username
 Default user name of the device.
 If you have changed the username, please use the updated one.
0000
 Default password.
 If you have changed the password, please use the updated one.
AES
Code ‘AES’ defines encryption function.
Encryption Mode
0
Disable returned data encryption by AES128 function.
1
Enable returned data encryption by AES128 function.
*
End sign.