User's Manual

11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: [phone]｜Fax: [phone]｜[e-mail]
34
www.etek.com.tw
© Unictron Technologies Corp. All specifications subject to change without notice.
www.sanav.com
www.unictron.com
How to Restart The Device
Use this SMS command to restart the device remotely. This command allow user to restart the device
immediately or in schedule.
Setup format: #<User Name>, <Password>, <Function Code>, <interval of restart>*
Command: #username,0000,rst,9*
Command: #username,0000,rst,now*
Table: Restart Format Description
Table: Restart Response Description
SMS Text
Description
#
Start sign.
username
 Default user name of the device.
 If you have changed the username, please use the updated one.
0000
 Default password.
 If you have changed the password, please use the updated one.
rst
Mode ‘rst’ defines Restart the device.
now or 1~9
Now means restarting the device immediately
1~9: Unit is 0.5 hour.
1 means 0.5 hour
9 means 4.5 hours (0.5 times 9 equals 4.5)
*
End sign.
Situation
Response
Setup Succeeds
[username] + Setup OK. Device has been reset.
Setup Fail
[username] + Reset Fail!
Incorrect password
[username] + Password setup Fail!
Incorrect username
or command format
[username] + command error