User's Manual

11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: [phone]｜Fax: [phone]｜[e-mail]
24
www.etek.com.tw
© Unictron Technologies Corp. All specifications subject to change without notice.
www.sanav.com
www.unictron.com
Situation
Message Reply
Setup Succeeds
[username] +, Device GPRS APN is updated.
Table: APN Setup Response Description
STEP 7: Set up URL and TCP/UDP IP Address
Set up URL
This SMS command is for setting up a specified URL (Uniform Resource Locator) or IP address of HTTP protocol
server where the bracelet will transmit GPS (GPRMC) positioning data to for real time GPS tracking as route of
the device is set as HTTP mode.
E.g. Use function code 4 to setup the URL as the following command to configure URL for HTTP.
Setup Format：#<User Name>, <Password>, <Function Mode 4>, <URL>*
Example：#username,0000,4, http://www.sanavtw.com/uploadM1.php *
SMS Text
Description
#
Start sign.
username
Default ID of Bracelet.
If you have changed the Username, please use the updated one.
0000
Default password of Bracelet.
If you have changed the password, please use the updated one.
4
Mode 4 defines URL setup mode.
http://www.sanavtw.com
/uploadM1.php
Default domain name and the sign “?” is not allowed to write in the area.
*
End sign.
Table: URL Address Setup Format Description
Situation
Message Reply
Setup Succeeds
[username] + Device IP/Domain is updated.
Setup Fail
[username] + IP/Domain setup Fail!
Incorrect password
[username] + Password setup Fail!
Incorrect username or
command format
[username] + command error
Table: URL Address Setup Response Description