User's Manual

11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: [phone]｜Fax: [phone]｜[e-mail]
18
www.etek.com.tw
© Unictron Technologies Corp. All specifications subject to change without notice.
www.sanav.com
www.unictron.com
Set up Password
Generally, SMS command execution needs correct user name with password, or it will remain the same setting.
The SMS command default password is “0000”. It can be changed by following the command format.
For example, entering the SMS command as the following allows user to change the password from “0000” to
a new password “1111”. Only enter command with new password will be valid for setting change after it has
been changed.
Setup format：#<username>, <Password>, <Function Code>, <new Password>, <new Password>*
Example：#username,0000,2,1111,1111*
SMS/ COTA Command
Description
#
Start sign.
username
 Default ID of the device.
 If you have changed the username, please use the updated one.
0000
 Default password.
 If you have changed the password, please use the updated one.
2
Mode 2 defines the password setup mode.
1111
New password (Please note at the maximum of 4 number)
1111
Reconfirm the password
*
End sign.
Table: Password Change Format Description
Situation
Message Reply
Setup Succeeds
[username] + Device Password is updated.
Setup Fail
[username] + Password setup Fail!
Table: Password Change Response Description