User's Manual

11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: [phone]｜Fax: [phone]｜[e-mail]
17
www.etek.com.tw
© Unictron Technologies Corp. All specifications subject to change without notice.
www.sanav.com
www.unictron.com
STEP 1: Set up Username/Password (Optional)
Set up Username
Generally, SMS command execution needs correct user name (I.D) with password, or it will remain the same
setting.
The SMS command default user name is “username”. It can be changed by following the command format.
For example, entering the SMS command as the following allows user to change the user name from “username”
to a new user name “abc”.
Only enter new command with new user name after it has been changed.
Setup format：#<username>, <Password>, <Function Code>, <New username>*
Example：#username,0000,1, abc *
SMS Text
Description
#
Start sign.
username
Default ID of Bracelet.
If you have changed the username, please use the updated one.
0000
Default password of Bracelet.
If you have changed the password, please use the updated one.
1
Mode 1 defines user name setup mode.
abc
New defined user name.
At the maximum of 16 letters which can only be a~z,A~Z,0~9, @ - _ /
*
End sign.
Table: Username Setup Format Description
Situation
Message Reply
Setup Succeeds
[username] + Device username is updated.
Setup Fail
[username] + Device username setup fail!
Incorrect username or
command format
[username] + command error
Table: Username Setup Response Description