User's Manual
Shadowspec App (Android mobile devices)
Get to know your SS-1 Smart Battery
Warning:
1. Only use the Shadowspec Charging Adapter to charge the Shadowspec
SS-1 Bluetooth LED Controller.
2. DonotChargetheSS-1ControllerwhenitisttedtotheUmbrella.(Always
use the AC powered chargers indoors and in a dry, safe environment)
3. Do not puncture the SS-1 Controller (it contains a Lithium Ion Battery).
4. Do not store the SS-1 Controller on the Umbrella when not in use.
Function Button / Battery Status Light
The Function Push Button also serves as a pilot light indicating battery and /
or charging status. The LED light can be operated by pushing this button or via
our Shadowspec Mobile Application for Android™ devices. Please download
from the Google Play Store.
Button function:
Push once - Light on - 100% full power (brightness).
Push again - Light on - 50% full power (brightness).
Push again -Lighto (stand-by mode to accept Bluetooth
commands).
Battery status light function:
Red Light on - Unit charging.
Green Light on - Unit charged.
Red Light ashing - Battery requires charging.
Installation
Fig 3. Slide SS-1 Controller hooks into
key-slots located on the umbrella main spar
Fig 4. Plug the LED Light into the SS-1
Controller socket
1. Slide the fully charged SS-1 Controller onto the main umbrella spar at the
LED-light end.
2. Plug the LED light into the SS-1 Controller (Push in all the way, ensuring a
waterproof connection)
3. Remove the SS-1 Controller by sliding it back to release the hooks from the
key-slots. (See the Android Application manual for software installation and
Bluetooth controller pairing.)
Please go to www.shadowspec.com/smart-controller for the software installation
guide and Play Store download link.
The Shadowspec Google Play App allows you to control your Shadowspec LED
light via Bluetooth using your Android mobile device.
Multiple Umbrella lights can be stored in memory allowing control over
switching and dimming the light to create the desired ambience. (Note: only one
device can be controlled at any given time. Scrolling and pairing between devices will
allow for separate control)
The App allows password setup, custom device naming, a battery status monitor
as well as a handy timer for switching the LED lights. (Tip: Factory device password
is “12345678” – please feel free to change this at any time).
Specications
Shadowspec LED-Light
(Unity and Serenity models)
Input Voltage: 9V DC
Power Consumption: 900mA
Socket polarity: tip + / ring –
Shadowspec Charger
Input Voltage: 100V–240V AC
@ 50/60 Hz
Output Voltage: 24V @ 1000Ma
Plug polarity: tip + / ring –
Function Button /
Battery Status Light
LED light / Charger
Socket (dual function)
Fig 2. SS-1 Smart Battery
Locking hooks for mounting