User`s manual

ENDAT-K1001 USERS MANUAL
UNICORN COMPUTER CORP.
34
PS/2 Mouse Support
Select support for PS/2 Mouse.
Wait For “F1” If Error
When this setting is set to [Enabled] and the boot sequence encounters an error, it
asks you to press F1. If disabled, the system continues to boot without waiting for
you to press any keys.
Boot Device Priority
The items allow you to set the sequence of boot devices where BIOS attempts
to load the disk operating system. First press <Enter> to enter the sub-menu. Then
you may use the arrow keys ( ↑↓ ) to select the desired device, then press <+>, <->
or <PageUp>, <PageDown> key to move it up/down in the priority list.
Removable Drives
This setting allows users to set the priority of the removable devices. First press
<Enter> to enter the sub-menu. Then you may use the arrow keys ( ↑ ↓ ) to select
the desired device, then press <+>, <-> or <PageUp>, <Page-Down> key to move
it up/down in the priority list.
3-4. Security
Use this menu to set supervisor and user passwords.
Supervisor Password / Change Supervisor Password
Supervisor Password controls access to the BIOS Setup utility. These settings
allow you to set or change the supervisor password.