User`s manual

ENDAT-K1001 USERS MANUAL
UNICORN COMPUTER CORP.
32
C1E Support
When the C1E Support (Enhanced Halt Powerdown State) is enabled, the
processor will transition to a lower core to bus ratio and lower voltage ID driven by
the processor to the voltage regulator before entering Halt Powerdown State (C1).
Not all porcessors support Enhanced Halt Powerdown State (C1E).
USB Configuration
Legacy USB Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS and
SCO Unix.
USB 2.0 Controller Mode
This setting specifies the operation mode of the onboard USB 2.0 controller.
USB Mass Storage Device Configuration:
USB Mass Storage Reset Delay
This setting controls the number of seconds the POST waits for the USB mass
storage device after the start unit command is sent.
Emulation Type
This setting enables you to set the type of device you want the USB mass storage
device to emulate.