User`s manual

ENDAT-K1001 USERS MANUAL

UNICORN COMPUTER CORP.

I-PWR1: Inverter ON/OFF Level Select (2x3 with 2.0mm)

I-PWR1: LCD Backlight Voltage Select (2x3 with 2.0mm)

Inverter ON/OFF Level Select

LCD Backlight Voltage Select

GPIO2: LCD Brightness Select (2x4 with 2.0mm)

Notice1: The above voltage will effect to the pin-3 of LCDBK1 only

Notice2: GPIO2 must open all jumpers for S/W control

I-PWR1 Voltage

1-3 +3.3V*

3-5 +5V

I-PWR1 Voltage

2-4 +12V*

4-6 +5V

Pin No. Voltage (V)

1-2 +2.5V

3-4 +1.70V

5-6 +1.10V

1-2, 3-4 +1.25V

1-2, 5-6 +0.85V

3-4, 5-6 +0.72V

Close All +0.63V

Open all +5.0V

7-8 0V