ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. ENDAT-D2550 User’s Manual For ENDAT-D2550 PCB ver. A2 or later Feb.06.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Copyright Notice The content of this manual has been checked for accuracy. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this manual. The manufacturer reserves the right to make improvements or modification to this document and/or the product at any time without prior notice.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Specification: Model ENDAT-D2550 System Chipset Intel® NM10 CPU Supporting Intel Cedar View N2800 (Dual Core, 1.86GHz, 6.5Watt) Intel Cedar View D2550(Dual Core, 1.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. TABLE OF CONTENTS CHAPTER 1. INTRODUCTION....................................................... 5 1-1. 1-2. 1-3. 1-4. FEATURES .............................................................................................. 6 UNPACKING ............................................................................................ 7 ELECTROSTATIC DISCHARGE PRECAUTIONS ................................... 7 MOTHERBOARD LAYOUT .......................................
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Chapter 1. Introduction In order to cope with the challenges of the system performance issues and demand of much more visually embedded system in diverse application, ENDAT-D2550 system board provides the ultimate solution with Intel® Cedar View N2800 / D2550 Processors. This package offers a high performance Intel® CPU with optimal power efficiency on the embedded market. ENDAT-D2550 supports single channel DDR3 800/1066 MHz memory.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. 1-1. Features Basic Feature: Intel® Cedar View N2800 / D2550. Single channel DDR3 SO-DIMM socket supports 800/1066 MHz up to 4 GB. Dual PCI Express interface Gigabit Ethernet chip on-board. Intel® Graphics GMA3600. PCI + Mini-PCIe slot support. USB 2.0 x 8 (4 external + 4 internal/1 Share Mini PCI-E Slot, USB port7 share Mini PCI-E slot). Built-in HD Audio with 1.2W amplifier. Four fully functional serial ports. ATX Power input.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. 1-2. Unpacking The motherboard comes securely packaged in a sturdy cardboard shipping carton. In addition to the User's Manual, the motherboard package includes the following items: ENDAT-D2550 System Board One SATA HDD Cable Serial (2.54mm) port and Parallel port (2.0mm) Cable.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. 1-4. MOTHERBOARD LAYOUT.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Chapter 2. Setting up the Motherboard 2-1.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. J1: PS/2 Keyboard / Mouse Header (2x5 with 2.54mm) Pin No. Signal (KB) Pin No. Signal (MS) 1 KB Data 2 MS Data 3 KEY 4 KEY 5 GND 6 GND 7 +5V(DC) 8 +5V(DC) 9 KB_CLK 10 MS_CLK JKBMS1: External PS/2 Device Header (2x7 with 2.0mm) Pin No. Signal (KB) Pin No.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. JP10: LCD Backlight Voltage (for +5V) (1x2 with 2.0mm) Voltage JP10 (LVDS1) +5V JUSBP7: USB Port Select (2x3 with 2.0mm) J11 USB 7 Header Mini PCIE Slot* JUSB7 1-3,2-4 3-5,4-6 Notice: JUSBP7 sets USN PORT7 as PCIe slot or USB Header. Part 2: Onboard Connectors and Headers D-SUB Type Connector for COM1,2,3 port (RS-232) Pin No. Function Pin No.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. CN8, CN2, CN6: COM4 ~COM6 port Box Headers (2x5 with 2.54mm) Pin No. Function Pin No. Function 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND 10 N.C. LPT1, LTP2: Printer Port Box Header (2x13 with 2.0mm) Pin No. Description Pin No. Description 1 STB# 10 ACK# 2 PD0 11 BUSY 3 PD1 12 PE 4 PD2 13 SLCT 5 PD3 14 AFD# 6 PD4 15 ERR# 7 PD5 16 INIT# 8 PD6 17 SLIN# 9 PD7 18-25 GND J1: PS/2 Keyboard / Mouse Header (2x5 with 2.54mm) Pin No. Signal (KB) Pin No.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. J6, J7, J11: Pin Header for USB 4, 5, 6, 7 ports (2x5 with 2.54mm) Pin No. Function Pin No. Function 1 USB_VCC 2 USB_VCC 3 USBD44 USBD55 USBD4+ 6 USBD5+ 7 USB_GND 8 USB_GND 9 KEY 10 USB_GND Notice: JUSBP7 sets USN PORT7 as PCIe slot or USB Header. J4: Digital I/O Header (2x7 with 2.0mm) Pin No. Function Pin No. Function 1 +5V 2 +5V 3 DIO-OUT0 4 DIO-IN0 5 DIO-OUT1 6 DIO-IN1 7 DIO GND 8 DIO GND 9 DIO-OUT2 10 DIO-IN2 11 DIO-OUT3 12 DIO-IN3 13 +3.3V 14 +3.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. J9: LINE-IN & MIC-IN Header (2 x 4 with 2.54mm) Pin No. Signal (KB) Pin No. Signal (MS) 1 LINE_IN_R 2 MIC_ R 3 JACK_DETECT 4 JACK_DETECT 5 GND_AUD 6 GND_AUD 7 LINE_IN_L 8 MIC_ L Notice: Please connect the jack detect pin to “GND_AUD” if the actual connector cannot support the jack detect function! J10: SPDIF Header (1 x 5 with 2.54mm) Pin No. Signal (KB) Pin No. Signal (MS) 1 +5V 4 GND 2 N.C 5 SPDIF-IN 3 SPDIF-OUT SMB1: SM BUS Header (1 x 5 with 2.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. LVDS: Single LVDS (18/24 bit only, 1.25mm) MB: DF-13A-40DP-1.25V / Map: DF13-40DS-1.25C Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 Signal VBL GND DISP.ON/OFF LCD POWER GND Odd 0+ Odd 1+ Odd 2+ Odd 3+ Odd CLK+ GND Pin No. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 N.C N.C N.C N.C N.C LCD POWER GND GND VBL Signal VBL GND GND LCD POWER GND Odd 0Odd 1Odd 2Odd 3Odd CLK KEY N.C N.C N.C N.C N.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. 2-2. Installing Memory The DDR3 SO-DIMM sockets of ENDAT-D2550 support up to 4GB memory. The speed of DDR3 memory can be DDR3-800 or DDR3-1066. 2-3. Shared VGA Memory The ENDAT-D2550 built-in Intel® GMA3600 graphic engine with DVMT 4.0 up system memory. The amount of video memory on motherboard determines the number of colors and the video graphic resolution. 2-4.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Sample code (using TurboC/C++ 3.0): #include #include #include
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. 2-5. Digital I/O J4 Pin define: J4: Digital I/O Header (2x7 with 2.0mm) Pin No. Function Pin No. Function 1 +5V 2 +5V 3 DIO-OUT0 4 DIO-IN0 5 DIO-OUT1 6 DIO-IN1 7 DIO GND 8 DIO GND 9 DIO-OUT2 10 DIO-IN2 11 DIO-OUT3 12 DIO-IN3 13 +3.3V 14 +3.3V Digital I/O port address: This function is support by onboard super I/O chip; it can be control easily by change the register of super I/O chip via I/O port “2Eh” and “2Fh”.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Sample code for output (using Turbo C/C++ 3.0): bit No 7 6 5 4 3 2 NA NA NA NA DIO-O3 DIO-O2 Map 1 0 DIO-O1 DIO-O0 Sample code for output (using Turbo C/C++ 3.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Sample code for input (using Turbo C/C++ 3.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Chapter 3.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Following setting belongs to standard function setting: Standard CMOS Features The features setting Data/Time and SATA port 、system memory Information. ˙System Date (mm:dd:yy) . ˙System Time (hh:mm:ss). ˙Halt On (All Error, No Error, All, But Keyboard). ˙System Memory Information This submenu provides information about the system memory. Advanced BIOS Features The features setting system boot-up priority and keyboard operation、 BIOS Security.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Integrated Peripherals The features setting IO (serial and parallel port) resources, SATA type and AUDIO、USB Controller set.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. PC Health Status The features Show System temperature、temperature protection 、Fan speed 、 voltage. When the CPU temperature exceeds Shutdown Temperature the set, the system will automatically shut down. When the CPU temperature exceeds CPU Warning Temperature the set, the system will issue a warning sound. Load Optimized Defaults The features Load BIOS default setting. Set Supervisor Password The features Set BIOS setup administrator password.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Chapter 4. VGA, LVDS and drivers 4-1. Graphic controller Feature The ENDAT-D2550 integrated a high performance Intel® GMA3600 GFX engine with Intel® DVMT 4.0 technology. The Intel® GMA3600 offering the 3D enhancements enable greater flexibility and scalability. Improved GFX engine support Microsoft DirectX 10, OpenGL 1.5 on Windows, and OpenGL 2.0 on Linux.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. 4-2. Driver Utility Installation Guide 1. When finishing the installation of Windows XP (support 2D graphic only), Vista, please install the relative Intel® chipsets, display and AUDIO driver manually for compliance compatibility of hardware environment. 2. Please contact sales department of UNICORN for Embedded OS user driver (Linux, Windows CE and Windows XP embedded).
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Appendix A: FLASH MEMORY UTILITY Using this package to update the system BIOS from a disk file to the on board Flash memory. Be aware any improper update of the system BIOS will cause the malfunction of the system. Method of update BIOS: 1. Please contact one of the Sales Representative on behalf of Unicorn to acquire “BIOS update package”, and process following procedures for the BIOS UPDATE. 2.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Appendix B: LVDS PIN ASSIGNMENT LVDS: Single /Dual Channel LVDS (18/24/36/48 bit only, 1.25mm) MB: DF-13A-40DP-1.25V / Map: DF13-40DS-1.25C Pin No. Signal Pin No. Signal 1 VBL 2 VBL 3 GND 4 GND 5 DISP.ON/OFF 6 GND 7 LCD POWER 8 LCD POWER 9 GND 10 GND 11 Odd 0+ 12 Odd 013 Odd 1+ 14 Odd 115 Odd 2+ 16 Odd 217 Odd 3+ 18 Odd 319 Odd CLK+ 20 Odd CLK 21 GND 22 KEY 23 24 Even 0+ Even 0-.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. Appendix C: LIMITED WARRANTY Standard Two years limited warranty on all our ENDAT series all-in-one motherboards and embedded board. Products that become defective during the warranty period shall be repaired, or subject to manufacturer’s option, replaced. The limited warranty applies to normal proper usage of the hardware and does not cover products that have been modified or subjected to unusual electrical or physical stress.
ENDAT-D2550 USERS MANUAL UNICORN COMPUTER CORP. RMA SERVICE REQUEST FORM When requesting RMA service, please fill out this “RMA Service Request Form”. This form needs to be shipped with your returns. Service cannot begin until we have this information. RMA NO.: Company: Person to Contact: Phone No: Purchase Date : Fax No. : Applied Date : Return Shipping Address: Model No. Serial No.
